2771010 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  4
• Overvoltage category
  III
• Connection in acc. with standard
  CSA
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Result of power-frequency withstand voltage test
  Test passed
• Bending test rotation speed
  10 rpm
• Conductor cross section tensile test
  4 mm²
• Requirements, voltage drop
  ≤ 3.2 mV
• Conductor cross section short circuit testing
  4 mm²
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Height NS 35/7,5
  62 mm
• Conductor cross section solid min.
  0.2 mm²
• Conductor cross section AWG min.
  24
• Conductor cross section flexible, with ferrule with plastic sleeve max.
  1.5 mm²
• Number of levels
  2
• Degree of pollution
  3
• Maximum load current
  32 A (in case of a 4 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors.)
• Nominal voltage UN
  500 V
• Open side panel
  Yes
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Tractive force setpoint
60 N
Result of voltage-drop test
Test passed
Short-time current
0.48 kA
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
End cover width
2.5 mm
Height NS 35/15
69.5 mm
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible max.
2.5 mm²
Cross section with insertion bridge, stranded max.
2.5 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.0
27141100
ECLASS 5.1
27141100
ETIM 4.0
EC000897
ETIM 7.0
EC000897
UNSPSC 20.0
39121410
Color
gray
Insulating material group
I
Maximum power dissipation for nominal condition
0.77 W (the value is multiplied when connecting multiple levels)
Result of surge voltage test
Test passed
Checking the mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of tight fit on support
Test passed
Short circuit stability result
Test passed
Relative insulation material temperature index (Elec.; UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Width
5.2 mm
Height NS 32
67 mm
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Cross section with insertion bridge, solid max.
2.5 mm²
2 conductors with same cross section, solid max.
1 mm²
Tightening torque, min
0.5 Nm
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ECLASS 6.0
27141100
ETIM 3.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
Rated surge voltage
6 kV
Nominal current IN
24 A
Back of the hand protection
guaranteed
Power frequency withstand voltage setpoint
1.89 kV
Bending test turns
135
Tight fit on carrier
NS 32/NS 35
Result of temperature-rise test
Test passed
Result of thermal test
Test passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Length
67 mm
Conductor cross section solid max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
REACh SVHC
Lead 7439-92-1
ECLASS 4.0
27141100
ETIM 6.0
EC000897
UNSPSC 7.0901
39121410
Nominal cross section
2.5 mm²
Insulating material
PA
Flammability rating according to UL 94
V0
Finger protection
guaranteed
Surge voltage test setpoint
7.3 kV
Result of flexion and pull-out test
Test passed
Tensile test result
Test passed
Setpoint
1 N
Proof of thermal characteristics (needle flame) effective duration
30 s
Static insulating material application in cold
-60 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Connection method
Screw connection
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Stripping length
8 mm
Tightening torque max
0.6 Nm
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 10.0.1
27141120
ECLASS 7.0
27141120
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
UNSPSC 21.0
39121410
2 conductors with same cross section, solid min.
0.2 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
Screw thread
M3
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.1
27141100
ECLASS 9.0
27141120
ETIM 2.0
EC000897
UNSPSC 11
39121410
UNSPSC 19.0
39121410