2708326 Phoenix Contact Data & Networking Devices
Part#:2708326
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 1
Nov 21, 2024
FO converter with integrated optical diagnostics, alarm contact, for RS-485 2-wire bus systems (SUCONET K, Modbus ...) up to 500 kbps, NRZ coding, T-coupler with two FO interfaces (BFOC), 850 nm, for PCF/fiberglass cable (multimode)
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Data & Networking Devices that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2708326 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Conductor cross section AWG min. 24
- Conductor cross section flexible min. 0.2 mm²
- Transmit capacity, minimum -4 dBm (200/230 µm)
- Free from substances that could impair the application of coating according to P-VW 3.10.7 57 65 0 VW-AUDI-Seat central standard
- Comments Criterion B
- Depth 105 mm
- ECLASS 4.0 27230200
- ECLASS 6.0 19179200
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Degree of protection IP20
- Noise immunity EN 61000-6-2:2005
- Mounting type DIN rail mounting
- Color green
- Typical current consumption 120 mA (24 V DC)
- Connection method B-FOC (ST®)
- File format/coding UART (11/10 bit switchable; NRZ), slip-tolerant
- Conductor cross section solid min. 0.2 mm²
- ECLASS 9.0 19170114
- Serial transmission speed 4.8/ 9.6/ 19.2/ 38.4/ 57.6/ 75/ 93.75/ 115.2/ 136/ 187.5/ 375/ 500 kbps
- Transmission length incl. 3 dB system reserve 2800 m (with F-K 200/230 8 dB/km with quick mounting connector)
- UNSPSC 19.0 43223323
- Maximum switching voltage 60 V DC
- Additional text Please follow the special installation instructions in the documentation!
- EMC B
- Connection in acc. with standard CUL
- REACh SVHC Lead 7439-92-1
- ECLASS 5.0 27230200
- Max. current consumption 130 mA
- UNSPSC 7.0901 39121008
- Supply voltage range 18 V DC ... 30 V DC (via pluggable COMBICON screw terminal block)
- Data direction switching Automatic control
- Termination resistor 390 Ω
- Overrange receiver -3 dBm (200/230 µm)
- Output name Relay output
- Designation Air clearances and creepage distances
- Temperature B
- Vibration A
- Enclosure Required protection according to the Rules shall be provided upon installation on board
- ECLASS 10.0.1 19170132
- ETIM 4.0 EC001423
- UNSPSC 6.01 30211506
- Height 99 mm
- Altitude ≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation)
- Bit delay ≤ 1 bit
- Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU
- Test voltage data interface/power supply 1.5 kVrms (50 Hz, 1 min.)
- Type of test Shock in acc. with EN 60068-2-27/IEC 60068-2-27
- Standards/regulations DIN EN 60664-1
- ECLASS 7.0 19179290
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Transmission length min. 1 m ()
- Conductor cross section AWG max. 14
- Permissible humidity (operation) 30 % ... 95 % (non-condensing)
- ETIM 7.0 EC001467
- Bit distortion, input ± 35 % (permitted)
- Noise emission EN 55011
- Minimum receiver sensitivity -32.5 dBm (50/125 µm)
- Wavelength 850 nm
- Output description Alarm output
- Identification DNV GL
- ETIM 6.0 EC001467
- MTBF 159 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5 days a week, 8 hours a day))
- UNSPSC 12.01 39121008
- UNSPSC 20.0 43223323
- Operating mode Semi-duplex
- Certificate PTB 06 ATEX 2042 U
- Test result 15g, 11 ms period, half-sine shock pulse
- UNSPSC 13.2 43222604
- Transmission protocol Protocol-transparent to the RS-485 interface
- UNSPSC 21.0 43223323
- Net weight 210.08 g
- Number of outputs 1
- Limiting continuous current 0.46 A
- Nominal supply voltage 24 V DC (in acc. with UL)
- Interface 1 RS-485 interface, 2-wire
- Transmission medium PCF fiber
- Width 35 mm
- Conductor cross section flexible max. 2.5 mm²
- No. of channels 2
- Humidity A
- Contact discharge ± 6 kV
- Ambient temperature (operation) -20 °C ... 60 °C
- Bit distortion, output < 6.25 %
- Electrical isolation VCC // RS-485
- Housing material PA 6.6-FR
- ECLASS 4.1 27230200
- ETIM 2.0 EC001423
- UNSPSC 11 39121008
- UNSPSC 18.0 43223323
- ETIM 3.0 EC001423
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 5.1 27230200
- Signal ± 1 kV
- ECLASS 11.0 19170411
- Conductor cross section solid max. 2.5 mm²
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
This item can ship within 24h!
1-year warranty
$1,361.65
Stock:
1
Select Qty:
$1,361.65
$1,361.65 each
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
