2702971 Phoenix Contact Electrical Measuring & Monitoring Instruments
Part#:2702971
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
About the product: Pluggable SIL coupling relay as an input/output accessory for VIP base module, SIL 3 high and low-demand applications, safe-state-off, couples digital output signals to the periphery, 1 enabling current path, 1 confirmation current path, test pulse filter
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Electrical Measuring & Monitoring Instruments that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2702971 Phoenix Contact price in the box on the right side or send a quick quote.
2702971 Product Details
- Width 10 mm
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Maximum altitude ≤ 2000 m (Above sea level)
- Depth 112 mm
- Max. permissible humidity (storage/transport) 75 % (on average, 85% infrequently, non-condensing)
- Inrush current min. 1 mA
- Filter time max. 3 ms (at pins 05/06 in the event of voltage dips at Us)
- Output name Confirmation current path
- Switching voltage min. 19.2 V DC
- Limiting continuous current 100 mA
- Switching capacity according to IEC 60947-5-1 3 A (24 V (DC13))
- Recovery time 500 ms
- Net weight 51.124 g
- Assembly instructions See derating curve
- Status display 2 x LED bi-color (green, red)
- Housing color yellow
- Stop category 0
- Standards/regulations DIN EN 50178, EN 60079-15
- Shock 15 g (in the event of continuous stress caused by shock, contact reactions are possible.)
- REACh SVHC Lead 7439-92-1
- Ambient temperature (operation) -40 °C ... 70 °C (observe derating)
- Power consumption at US typ. 0.77 W
- Inrush current at UD typ. 200 mA (Δt < 1 ms; at pins 04/03 for UD)
- Input current at UD 7 mA (at pins 04/03 for UD; + 100 mA depending on load at pin 02)
- Contact type 1 confirmation current path
- Switching capacity min. 20 mW
- Typical release time at US 30 ms (when controlled via pins 05/06)
- Mounting position vertical or horizontal
- Height 75 mm
- Max. permissible relative humidity (operation) 75 % (on average, 85% infrequently, non-condensing)
- Rated control circuit supply voltage US 24 V DC -20 % / +25 %
- Rated control supply current IS typ. 25 mA
- Number of outputs 1 (undelayed)
- Output description Safety-related N/C contacts
- Sq. Total current 9 A2 (observe derating)
- Output fuse 150 mA Fast-blow
- Nominal operating mode 100% operating factor
- Degree of protection IP20
- Designation Air clearances and creepage distances between the power circuits
- Safety Integrity Level Claim Limit (SIL CL) 3
- Rated surge voltage/insulation Basic insulation 4 kV between all current paths and housing
- Overvoltage category III
- China RoHS Environmentally Friendly Use Period = 50 years
- ETIM 6.0 EC001449
- Vibration (operation) 10 Hz ... 150 Hz, 2g
- ECLASS 5.1 27371901
- Diagnostic supply voltage UD 24 V DC -20 % / +25 % (at pin 04)
- Protective circuit Surge protection 35 V suppressor diode (pins 05/06)33 V suppressor diode (pins 04/03)35 V suppressor diode (pins 02/03)
- Contact material AgCuNi, + Au
- Mechanical service life 10x 106 cycles
- Typical pickup time at US 150 ms (when controlled via pins 05/06)
- Relay type Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
- Mounting type Plug-in mounting
- Housing material PA 6.6
- pluggable Yes
- Safety Integrity Level (SIL) 3 (Reference IEC 61508)
- Rated insulation voltage 250 V AC
- Degree of pollution 2
- Environmental simulation test ISA-S71.04 (G3)
- ECLASS 6.0 27371819
- Min. degree of protection of inst. location IP54
- Connection method Pluggable onto VIP base module
- Category 4
- Performance level (PL) e
- Conformance CE-compliant
- ECLASS 10.0.1 27371819
- ECLASS 11.0 27371819
- ETIM 7.0 EC001449
- ECLASS 9.0 27371819
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
2702971
Select Qty:
Average response time: 11 minutes
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨