2702925 Phoenix Contact Electrical Safety Devices
Part#:2702925
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Checking verified in-stock parts...
About the product: 1 or 2-channel contact extension with wide range input, 4 N/O contacts, 1 N/C contact, 1 confirmation current path, together with basic device up to Cat. 4, PL e according to EN ISO 13849, pluggable Push-in terminal block, width: 22.5 mm
About the manufacturer: Phoenix Contact develops and manufactures industrial electrical and electronic technology products that power, protect, connect and automate systems and equipment.
Check out the 2702925 Phoenix Contact price in the box on the right side or send a quick quote.
2702925 Product Details
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Depth 114.5 mm
- Ambient temperature (operation) -20 °C ... 55 °C (observe derating)
- Typ. starting time with Us < 100 ms (when controlled via A1)
- Operating voltage display 1 x green LED
- Maximum switching frequency 0.5 Hz
- Minimum switching voltage 5 V AC/DC
- Height 112 mm
- Max. permissible humidity (storage/transport) 75 % (on average, 85% infrequently, non-condensing)
- Protective circuit Surge protection Suppressor diode and varistors
- Contact type 4 enabling current paths
- Maximum inrush current 8 A
- Sq. Total current 72 A2 (observe derating)
- Switching capacity according to IEC 60947-5-1 5 A (24 V (DC13))
- Mounting type DIN rail mounting
- Degree of protection IP20
- Connection method Push-in connection
- Conductor cross-section flexible with ferrule without plastic sleeve 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
- Safety Integrity Level (SIL) 3
- Overvoltage category III
- ECLASS 11.0 27371819
- ECLASS 9.0 27371819
- Width 22.5 mm
- Maximum altitude ≤ 2000 m (Above sea level)
- Inrush current < 38 A (Δt = 50 µs at Us)
- Recovery time < 1 s
- Limiting continuous current 6 A (N/O contact, pay attention to the derating)
- Mechanical service life 10x 106 cycles
- Net weight 170.91 g
- Min. degree of protection of inst. location IP54
- Conductor cross section flexible 0.2 mm² ... 1.5 mm²
- Conductor cross-section flexible with ferrule and plastic sleeve 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
- Standards/regulations DIN EN 50178/VDE 0160
- Rated insulation voltage 250 V AC
- REACh SVHC Lead 7439-92-1
- ECLASS 5.1 27371901
- ECLASS 6.0 27371800
- Max. permissible relative humidity (operation) 75 % (on average, 85% infrequently, non-condensing)
- Rated control circuit supply voltage US 42 V AC/DC ... 230 V AC/DC -15 % ... +10 % (Rated control circuit supply voltage US)
- Typical release time < 20 ms (Control via A1 at 42 V DC)
- Contact material AgSnO2
- Interrupting rating (ohmic load) max. 1500 VA (N/O contact, 250 V AC, τ = 0 ms)
- Switching capacity min. 50 mW
- Relay type Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
- Mounting position vertical or horizontal
- pluggable Yes
- Stop category 0
- Designation Air clearances and creepage distances between the power circuits
- Safety Integrity Level Claim Limit (SIL CL) 3 (In conjunction with suitable evaluating device)
- Conformance CE-compliant
- ECLASS 10.0.1 27371819
- ETIM 7.0 EC001449
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Rated control supply current IS typ. 35 mA (42 V DC)
- Power consumption at US max. 1.5 W (with DC)
- Maximum switching voltage 250 V AC/DC (Observe the load curve)
- Inrush current, minimum 10 mA
- Output fuse 6 A gL/gG (N/O contact and N/C contact 61/62)
- Housing color yellow
- Conductor cross-section AWG 24 ... 16
- Stripping length 8 mm
- Category 4 (In conjunction with suitable evaluating device)
- Rated surge voltage/insulation Safe isolation, reinforced insulation 6 kV:between (A1/A2) and the remaining current pathsbetween (51/52) and the remaining current pathsbetween (61/62) and the remaining current pathsbetween (13/14, 23/24, 33/34, 43/44) and the remaining current paths
- Shock 15g
- ECLASS 7.0 27371819
- Maximum interrupting rating (inductive load) 48 W (N/O contact, 24 V DC, τ = 40 ms)
- Nominal operating mode 100% operating factor
- Assembly instructions See derating curve
- Housing material PBT
- Conductor cross section solid 0.2 mm² ... 1.5 mm²
- Performance level (PL) e (In conjunction with suitable evaluating device)
- Degree of pollution 2
- Vibration (operation) 10 Hz ... 150 Hz, 2g
- China RoHS Environmentally Friendly Use Period = 50 years
- ETIM 6.0 EC001449
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
Shipping and Delivery Worldwide
calculate cost and time at Checkout
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨