2702533 Phoenix Contact Data & Networking Devices

2702533 Product Details

• Height
  130 mm
• Permissible humidity (storage/transport)
  10 % ... 95 % (non-condensing)
• Electromagnetic compatibility
  Conformance with RED Directive 2014/53/EU
• Net weight
  358 g
• Wireless licences
  USA
• Conductor cross section flexible, with ferrule without plastic sleeve
  0.25 mm² ... 1.5 mm²
• Conductor cross section solid max.
  1.50 mm²
• Operating mode
  Indoor use only
• Auxiliary protocols
  ARP, DHCP, PING (ICMP), SNMP V1/V2, SMTP(S), NTP, SSL/TLS, STARTTLS
• SIM interface 1
  1.8 volt, 3 volt
• Web-based management
  yes
• Width
  45 mm
• Permissible humidity (operation)
  10 % ... 95 % (non-condensing)
• Electrical isolation
  VCC // LTE // Ethernet // PE
• Color
  gray
• Degree of pollution
  2
• Connection method
  RJ45 jack, shielded
• Conductor cross section flexible max.
  1.50 mm²
• Conductor cross section AWG min.
  26
• Transmission length
  100 m (shielded twisted pair)
Data rate
≤ 150 Mbps (LTE (DL))
Country support
USA
Output name
Digital output
Description of the input
Digital input
Identification
ISA-S71.04-1985 G3 Harsh Group A
Comments
Criterion B
ECLASS 5.0
19030100
ETIM 6.0
EC001478
Conductor cross section flexible min.
0.14 mm²
Stripping length
9 mm
No. of ports
2 (SELV)
Interface description
LTE (FDD) / UMTS
UMTS
HSPA 3GPP R9
Security functions
Supported 3DES, AES-128, -192, -256 ESP tunnel X.509v3, PSK MD5, SHA-1 RFC 3706 IP, port, protocol
Current output signal
≤ 50 mA (Not short-circuit proof)
Voltage input signal
10 V DC ... 30 V DC
Test result
15g
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 6.0
19170100
ETIM 7.0
EC001478
Depth
126 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Mounting type
DIN rail mounting
MTTF
383 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
Supply voltage range
10 V DC ... 30 V DC (SELV, via pluggable Push-in terminal block)
Typical current consumption
< 200 mA (24 V DC)
Conductor cross section AWG max.
16
Interface
Ethernet
Serial transmission speed
10/100 Mbps, auto negotiation
LTE
CAT4
Management
Web-based management, SNMP
Number of outputs
1
Switching level "1" signal
10 V DC ... 30 V DC
Type of test
Shock in acc. with EN 60068-2-27/IEC 60068-2-27
Signal
± 1 kV (Data line, asymmetrical)
ECLASS 9.0
19170103
Utilization restriction
Use in potentially explosive areas is not permitted in China.
Ambient temperature (operation)
-40 °C ... 70 °C (Maximum transmission power 5 dBm)
Degree of protection
IP20 (Manufacturer's declaration)
Noise immunity
EN 61000-6-2
Housing material
Plastic
Max. current consumption
1.7 A
Conductor cross section, flexible, with ferrule, with plastic sleeve
0.25 mm² ... 0.75 mm²
Conductor cross section solid min.
0.14 mm²
Interface 1
Ethernet interface, 10/100Base-T(X) in accordance with IEEE 802.3
Protocols supported
TCP/IP, UDP/IP, FTP, HTTP(S)
Antenna
50 Ω impedance SMA antenna socket
Number of VPN tunnels
3
Voltage output signal
10 V DC ... 30 V DC (depending on the operating voltage)
Designation
Corrosive gas test
Contact discharge
± 6 kV (Test Level 3)
ECLASS 11.0
19170502
ECLASS 5.1
19030100
Altitude
≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation)
Number of inputs
2
Standards/regulations
EN 61000-4-6
ECLASS 10.0.1
19170502
ECLASS 7.0
19170103
Frequency range
0.15 MHz ... 80 MHz

Product condition