Welcome to Quotebeam
Nikki Gonzales
Bryan Obida
Nick Goetz

Live support:

Monday - Friday 6AM - 6PM PST

2702523 Phoenix Contact Electrical Safety Devices

Phoenix Contact 2702523 Coupling relay for electrical isolation and power adaptation for SIL 3 F&G applications, low demand, load diagnostics in the Off and On state for wire break and short circuit, 1 enabling current path, test pulse filter, plug-in Push-in terminal block, wid
Phoenix Contact

Part#:2702523

Manufacturer:Phoenix Contact

Product Lifecycle:Active

Checking verified in-stock parts...

About the product: Coupling relay for electrical isolation and power adaptation for SIL 3 F&G applications, low demand, load diagnostics in the Off and On state for wire break and short circuit, 1 enabling current path, test pulse filter, plug-in Push-in terminal block, wid

About the manufacturer: Phoenix Contact develops and manufactures industrial electrical and electronic technology products that power, protect, connect and automate systems and equipment.

Check out the 2702523 Phoenix Contact price in the box on the right side or send a quick quote.

2702523 Product Details

  • Utilization restriction
    Use in potentially explosive areas is not permitted in China.
  • Depth
    114.5 mm
  • Air pressure (operation)
    79 kPa ... 106 kPa
  • Power consumption at US
    typ. 2 W (at US/UD; On state)
  • Diagnostic supply voltage UD
    24 V DC -20 % / +25 %
  • Power consumption at UD
    typ. 0.9 W (at UD; Off state)
  • Ambient temperature (operation)
    -25 °C ... 60 °C (observe derating)
  • Maximum altitude
    ≤ 2000 m (Above sea level)
  • Rated control supply current IS
    typ. 75 mA
  • Input current at UD
    35 mA (at UD = 24 V)
  • Output name
    Signaling current path
  • Contact type
    1 signaling current path
  • Diagnostic threshold
    7 Ω ... 20 kΩ (configurable)
  • Net weight
    147.48 g
  • Assembly instructions
    See derating curve
  • Housing material
    Frianyl A 63 R V0
  • Conductor cross-section flexible with ferrule without plastic sleeve
    0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
  • Rated insulation voltage
    250 V AC
  • Degree of pollution
    2
  • Environmental simulation test
    ISA-S71.04 (G3)
  • ECLASS 10.0.1
    27371819
  • ETIM 7.0
    EC001449
  • Width
    17.5 mm
  • Max. permissible humidity (storage/transport)
    75 % (on average, 85% infrequently, non-condensing)
  • Air pressure (storage/transport)
    79 kPa ... 106 kPa
  • Inrush current
    max. 800 mA (Δt  100 ms)
  • Protective circuit
    Surge protection 36 V suppressor diode (A1-A2)33 V suppressor diode (24V-GND)
  • Inrush current at UD
    1.5 A (Δt < 10 µs)
  • Type of protection
    Surge protection
  • Contact material
    AgNi, gold-flashed, Ag alloy
  • Switching capacity
    min. 1 W
  • Typical pickup time at US
    typ. 100 ms (when controlled via A1-A2)
  • Degree of protection
    IP20
  • Housing color
    yellow
  • Status display
    1 x yellow LED, 1 x green LED, 1 x red LED
  • Safety Integrity Level (SIL)
    3 (Reference IEC 61508)
  • Standards/regulations
    DIN EN 50178
  • Vibration (operation)
    10 Hz ... 150 Hz, 2g
  • ECLASS 9.0
    27371819
  • Ambient temperature (storage/transport)
    -40 °C ... 65 °C
  • Rated control circuit supply voltage US
    24 V DC -15 % / +10 %
  • Filter time
    2 ms (at A1-A2 in the event of voltage dips at Us)
  • Number of inputs
    3
  • Number of outputs
    1 (without delay, floating)
  • Limiting continuous current
    3 A (Observe derating, load type, and on-load voltage)
  • Switching frequency
    max. 0.5 Hz
  • Nominal operating mode
    100% operating factor
  • Mounting position
    vertical or horizontal
  • pluggable
    Yes
  • Conductor cross section flexible
    0.2 mm² ... 1.5 mm²
  • Stripping length
    8 mm
  • Rated surge voltage/insulation
    Basic insulation 4 kV between all current paths and housing
  • REACh SVHC
    Lead 7439-92-1
  • China RoHS
    Environmentally Friendly Use Period = 50 years
  • ECLASS 6.0
    27371800
  • Height
    117.4 mm
  • Max. permissible relative humidity (operation)
    75 % (on average, 85% infrequently, non-condensing)
  • Description of the input
    Test point for proof test
  • Output description
    non-safety-related N/C contact
  • Switching voltage
    min. 16 V AC/DC
  • Mechanical service life
    approx. 5x 107 cycles
  • Recovery time
    1 s (when controlled via A1-A2)
  • Mounting type
    DIN rail mounting
  • Min. degree of protection of inst. location
    IP54
  • Conductor cross-section AWG
    24 ... 16
  • Conductor cross-section flexible with ferrule and plastic sleeve
    0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
  • Overvoltage category
    III
  • ECLASS 11.0
    27371819
  • ECLASS 7.0
    27371819
  • Current consumption
    typ. 20 mA (Input TP1)
  • Protective circuit/component
    36 V suppressor diode
  • Sq. Total current
    9 A2 (observe derating)
  • Typical release time at US
    typ. 30 ms (when controlled via A1-A2)
  • Short-circuit protection
    no
  • Relay type
    Electromechanical relay
  • Connection method
    Push-in connection
  • Conductor cross section solid
    0.2 mm² ... 1.5 mm²
  • Designation
    Air clearances and creepage distances between the power circuits
  • Shock
    15g, 11 ms
  • Conformance
    CE-compliant
  • ECLASS 5.1
    27371901
  • ETIM 6.0
    EC001449

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.

Shipping and Delivery Worldwide

calculate cost and time at Checkout


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo