2702412 Phoenix Contact Electrical Safety Devices

2702412 Product Details

• Ambient temperature (operation)
  -40 °C ... 60 °C (observe derating)
• Rated control supply current IS
  typ. 70 mA
• Inrush current
  min. 10 mA
• Input voltage range "0" signal
  0 V DC ... 5 V DC (for safe Off; at S12 and S22)
• Input voltage range "1" signal
  19.2 V DC ... 30 V DC
• Contact material
  AgSnO2
• Maximum interrupting rating (inductive load)
  48 W (24 V DC, τ = 40 ms)
• Switching capacity according to IEC 60947-5-1
  5 A (24 V (DC13))
• Typical pickup time at US
  < 100 ms (when controlled via A1)
• Recovery time
  < 500 ms
• Nominal operating mode
  100% operating factor
• Connection method
  Push-in connection
• Conductor cross-section AWG
  24 ... 16
• Stripping length
  8 mm
• Degree of pollution
  2
• REACh SVHC
  Lead 7439-92-1
• ECLASS 5.0
  27371900
• ETIM 3.0
  EC001449
• UNSPSC 13.2
  39121501
• UNSPSC 21.0
  39122205
Depth
114.5 mm
Maximum altitude
≤ 2000 m (Above sea level)
Input name
Start circuit
Output description
non-safety-related
Switching voltage
min. 5 V AC/DC
Switching frequency
0.5 Hz
Short-circuit protection
Yes
Net weight
202.5 g
Housing color
yellow
Operating voltage display
1 x green LED
Status display
3 x green LED
Category
4
Rated insulation voltage
250 V AC
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Designation
Air clearances and creepage distances between the power circuits
Protective circuit
Surge protection Suppressor diode
Input current range "0" signal
0 mA ... 2 mA (for safe Off; at S12 and S22)
Filter time
max. 3 ms (at S12, S22; test pulse width; blanking pulses/dark test)
Protective circuit/component
Suppressor diode
Contact type
1 signaling current path
Sq. Total current
1 A2
Output fuse
1 A gL/gG
Current
max. 100 mA
Relay type
Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Restart time
< 1 s (Boot time)
Assembly instructions
See derating curve
pluggable
Yes
Conductor cross section flexible
0.2 mm² ... 1.5 mm²
Safety Integrity Level (SIL)
3
Overvoltage category
II
Conformance
CE-compliant
ECLASS 11.0
27371819
ECLASS 5.1
27371900
ECLASS 7.0
27371819
UNSPSC 18.0
39122205
UNSPSC 20.0
39122205
Height
117.4 mm
Max. permissible relative humidity (operation)
75 % (on average, 85% infrequently, non-condensing)
Power consumption at US
typ. 1.68 W
Description of the input
non-safety-related
Max. permissible overall conductor resistance
150 Ω
Number of inputs
1
Output name
Signaling current path
Limiting continuous current
1 A
Interrupting rating (ohmic load) max.
1500 VA (250 V AC, τ = 0 ms)
Mechanical service life
10x 106 cycles
Maximum inrush current
1 A (Δt = 5 ms at Us)
Typical response time at US
< 100 ms (automatic start)
Mounting type
DIN rail mounting
Degree of protection
IP20
Conductor cross-section flexible with ferrule and plastic sleeve
0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Performance level (PL)
e (5 A DC13; 5 A AC15; 8760 switching cycles/year)
Safety Integrity Level Claim Limit (SIL CL)
3
Rated surge voltage/insulation
Basic insulation 4 kV between all current paths
Shock
15g for Δt = 11 ms (continuous shock: 10g for Δt = 16 ms)
ECLASS 6.0
27371800
ECLASS 9.0
27371819
ETIM 7.0
EC001449
UNSPSC 19.0
39122205
Width
22.5 mm
Max. permissible humidity (storage/transport)
75 % (on average, 85% infrequently, non-condensing)
Rated control circuit supply voltage US
24 V DC -20 % / +25 %
Current consumption
< 0.5 mA
Number of outputs
1 (digital)
Switching capacity
min. 50 mW
Voltage
23 V DC (Us - 1 V)
Typical release time at US
< 20 ms (when controlled via A1 or S12)
Mounting position
vertical or horizontal
Min. degree of protection of inst. location
IP54
Conductor cross section solid
0.2 mm² ... 1.5 mm²
Conductor cross-section flexible with ferrule without plastic sleeve
0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Stop category
0
Standards/regulations
DIN EN 60664-1:2008
Vibration (operation)
10 Hz ... 150 Hz, 2g
ECLASS 10.0.1
27371819
ECLASS 4.1
40020600
ECLASS 4.0
40020600
ETIM 4.0
EC001449
ETIM 6.0
EC001449

Product condition