2702356 Phoenix Contact Electrical Safety Devices

2702356 Product Details

• Width
  12.5 mm
• Max. permissible humidity (storage/transport)
  75 % (on average, 85% infrequently, non-condensing)
• Maximum altitude
  max. 2000 m (Above sea level)
• Current consumption
  max. 0.35 mA (at L1/L2/L3)
• Number of outputs
  2 (digital, PNP)
• Sq. Total current
  25 A2 (observe derating)
• Mechanical service life
  10x 106 cycles
• Short-circuit protection
  Yes
• Nominal operating mode
  100% operating factor
• Housing material
  PBT
• pluggable
  Yes
• Conductor cross-section AWG
  24 ... 16
• Stripping length
  8 mm
• Safety Integrity Level Claim Limit (SIL CL)
  3 (4 A DC13; 5 A AC15; 17520 switching cycles/year)
• Shock
  15g
• ECLASS 11.0
  27371811
• Height
  116.6 mm
• Rated control supply current IS
  typ. 50 mA
• Filter time
  1 ms (at A1 in the event of voltage dips at Us)
• Switching capacity
  min. 72 mW
Voltage
23 V DC (US - 1 V)
Typical pickup time at US
< 1 s
Assembly instructions
See derating curve
Conductor cross section solid
0.2 mm² ... 1.5 mm²
Conductor cross-section flexible with ferrule and plastic sleeve
0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Performance level (PL)
e (4 A DC13; 5 A AC15; 17520 switching cycles/year)
Standards/regulations
DIN EN 50178
Vibration (operation)
10 Hz ... 150 Hz, 2g
Conformance
CE-compliant
ECLASS 4.0
40020600
ETIM 4.0
EC001449
Max. permissible relative humidity (operation)
75 % (on average, 85% infrequently, non-condensing)
Inrush current
min. 3 mA
Output description
safety-related N/O contacts
Contact type
1 enabling current path
Output fuse
5 A gL/gG
Delay time range
0.5 s ... 20 s ±1 % (K1, K2 can be parameterized)
Degree of protection
IP20
Connection method
Push-in connection
Conductor cross section flexible
0.2 mm² ... 1.5 mm²
Designation
Air clearances and creepage distances between the power circuits
Rated insulation voltage
250 V AC
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.1
40020600
ECLASS 7.0
27371811
ETIM 7.0
EC001448
UNSPSC 7.0901
39121501
UNSPSC 21.0
39122331
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Depth
114.5 mm
Rated control circuit supply voltage US
24 V DC -15 % / +10 %
Power consumption at US
typ. 1.2 W
Limit frequency
max. 3 kHz (At voltages > 2 VRMS)
Output name
Enabling current path
Contact material
AgSnO2
Switching voltage
min. 24 V AC/DC
Maximum inrush current
500 mA
Response time
typ. 20 ms (at 50 Hz input frequency)
Mounting position
vertical or horizontal
Min. degree of protection of inst. location
IP54
Housing color
yellow
Stop category
0
Category
3
Rated surge voltage/insulation
Basic insulation 4 kV:between all current paths and housingBasic insulation 8 kV:between L1 and L2between L1 and L3between L2 and L3
Degree of pollution
2
ECLASS 5.0
27371900
ECLASS 9.0
27371811
ETIM 6.0
EC001448
UNSPSC 12.01
39121501
UNSPSC 20.0
39122331
Ambient temperature (operation)
-20 °C ... 55 °C (observe derating)
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Protective circuit
Surge protection Suppressor diode
Voltage input signal
max. 690 V AC/DC (at L1/L2/L3)
Limiting continuous current
5 A (observe derating)
Switching frequency
max. 0.5 Hz
Current
max. 100 mA
Net weight
143.9 g
Mounting type
DIN rail mounting
Status display
4 x LED Bi-Colour
Conductor cross-section flexible with ferrule without plastic sleeve
0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Safety Integrity Level (SIL)
3 (4 A DC13; 5 A AC15; 17520 switching cycles/year)
Overvoltage category
III
ECLASS 10.0.1
27371811
ECLASS 5.1
27371900
ETIM 3.0
EC001449
UNSPSC 6.01
30211901
UNSPSC 13.2
39122331
ECLASS 6.0
27371800
UNSPSC 11
39121501
UNSPSC 19.0
39122331
UNSPSC 18.0
39122331

Product condition