2702097 Phoenix Contact Electrical Safety Devices

2702097 Product Details

• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Max. permissible humidity (storage/transport)
  75 % (on average, 85% infrequently, non-condensing)
• Designation
  Air clearances and creepage distances between the power circuits
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Power consumption at US
  typ. 1.44 W
• Number of inputs
  1
• Width
  12.5 mm
• Rated control circuit supply voltage US
  24 V DC -20 % / +25 %
• Inrush current
  min. 3 mA
• Description of the input
  non-safety-related
• Concurrence
  ∞
• Contact material
  AgSnO2
• Switching capacity
  min. 60 mW
• Short-circuit protection
  Yes
• Nominal operating mode
  100% operating factor
• Relay type
  Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
• Housing color
  yellow
• pluggable
  Yes
• Stripping length
  8 mm
• Performance level (PL)
  e
Safety Integrity Level Claim Limit (SIL CL)
3
Conformance
CE-compliant
ECLASS 4.1
40020600
ECLASS 4.0
40020600
ECLASS 5.1
27371900
UNSPSC 20.0
39122205
Depth
114.5 mm
Height
116.6 mm
Max. permissible relative humidity (operation)
75 % (on average, 85% infrequently, non-condensing)
Rated control supply current IS
typ. 60 mA
Filter time
max. 3 ms (Test pulse width of low test pulses)
Input voltage range "0" signal
0 V DC ... 5 V DC
Output name
Enabling current paths
Contact type
2 enabling current paths
Sq. Total current
72 A2 (observe derating)
Current
max. 100 mA
Delay time range
0.2 s ... 60 s ±5 % (can be set for 27/28)
Degree of protection
IP20
Connection method
Push-in connection
Conductor cross-section flexible with ferrule and plastic sleeve
0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Category
4
Rated surge voltage/insulation
Basic insulation 4 kV: between all current paths and housingSafe isolation, reinforced insulation 6 kV:between (A1, A2, S11, S12, S21, S22, S34, M1) and enabling current path (13/14)between (A1, A2, S11, S12, S21, S22, S34, M1) and enabling current path (
REACh SVHC
Lead 7439-92-1
ECLASS 6.0
27371800
ETIM 6.0
EC001449
UNSPSC 19.0
39122205
Ambient temperature (operation)
-35 °C ... 60 °C (observe derating)
Maximum altitude
≤ 2000 m (Above sea level)
Input name
Start circuit
Output description
PNP
Switching voltage
min. 12 V AC/DC
Limiting continuous current
6 A (observe derating)
Voltage
approx. 23 V DC (US - 1 V)
Restart time
< 1 s (Boot time)
Mounting position
vertical or horizontal
Housing material
PBT
Min. degree of protection of inst. location
IP54
Stop category
0
Rated insulation voltage
250 V AC
Shock
15g
ECLASS 10.0.1
27371819
ECLASS 7.0
27371819
UNSPSC 18.0
39122205
Protective circuit
Surge protection Suppressor diode
Max. permissible overall conductor resistance
150 Ω
Number of outputs
1
Maximum inrush current
500 mA (Δt = 1 ms at Us)
Typical response time at US
< 35 ms (automatic start)
Net weight
126.45 g
Assembly instructions
See derating curve
Conductor cross section flexible
0.2 mm² ... 1.5 mm²
Conductor cross section solid
0.2 mm² ... 1.5 mm²
Safety Integrity Level (SIL)
3
Degree of pollution
2
Vibration (operation)
10 Hz ... 150 Hz, 2g
ECLASS 11.0
27371819
ETIM 7.0
EC001449
UNSPSC 13.2
39121501
Current consumption
< 3.2 mA (typically with US)
Input current range "0" signal
0 mA ... 2 mA
Limit frequency
min. 0 Hz
Mechanical service life
10x 106 cycles
Output fuse
6 A gL/gG (N/O contact)
Typical release time at US
< 25 ms (when controlled via S12 (only for undelayed contact 13/14))
Mounting type
DIN rail mounting
Status display
5 x bi-color LED
Conductor cross-section flexible with ferrule without plastic sleeve
0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Conductor cross-section AWG
24 ... 16
Standards/regulations
DIN EN 50178
Overvoltage category
III
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.0
27371900
ECLASS 9.0
27371819
UNSPSC 21.0
39122205

Product condition