2702095 Phoenix Contact Electrical Safety Devices
Part#:2702095
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
About the product: Safety relay for emergency stop, safety doors, light grid up to SILCL 1, Cat. 1, PL e, 1- or 2-channel operation, cross-circuit detection, can be retriggered, fall back/on delay 0.2 s to 60 s, 2 enabling current paths, US = 24 V DC, pluggable Push-in term
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Electrical Safety Devices that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2702095 Phoenix Contact price in the box on the right side or send a quick quote.
2702095 Product Details
- Number of outputs 1
- Contact material AgSnO2
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Width 12.5 mm
- Max. permissible relative humidity (operation) 75 % (on average, 85% infrequently, non-condensing)
- Rated control supply current IS typ. 50 mA
- Protective circuit Surge protection Suppressor diode
- Max. permissible overall conductor resistance 150 Ω
- Height 116.6 mm
- Ambient temperature (operation) -35 °C ... 60 °C (observe derating)
- Rated control circuit supply voltage US 24 V DC -20 % / +25 %
- Input name Start circuit
- Input current range "0" signal 0 mA ... 2 mA
- Output name Enabling current paths
- Switching capacity min. 60 mW
- Current max. 100 mA
- Nominal operating mode 100% operating factor
- Min. degree of protection of inst. location IP54
- Conductor cross section solid 0.2 mm² ... 1.5 mm²
- Performance level (PL) c (up to PL e depending on the application)
- Concurrence ∞
- Category 1 (up to Cat. 3 depending on the application)
- Rated surge voltage/insulation Basic insulation 4 kV: between all current paths and housingSafe isolation, reinforced insulation 6 kV:between (A1, A2, S11, S12, S21, S22, S34, M1) and enabling current path (13/14)between (A1, A2, S11, S12, S21, S22, S34, M1) and enabling current path (
- Conformance CE-compliant
- Depth 114.5 mm
- Max. permissible humidity (storage/transport) 75 % (on average, 85% infrequently, non-condensing)
- Designation Air clearances and creepage distances between the power circuits
- Input voltage range "0" signal 0 V DC ... 5 V DC
- Contact type 2 enabling current paths
- Voltage approx. 23 V DC (US - 1 V)
- Short-circuit protection Yes
- Relay type Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Maximum altitude ≤ 2000 m (Above sea level)
- Power consumption at US typ. 1.2 W
- Filter time max. 3 ms (Test pulse width of low test pulses)
- Number of inputs 1
- Current consumption < 3.2 mA (typically with US)
- Output description PNP
- Switching voltage min. 12 V AC/DC
- Limiting continuous current 6 A (observe derating)
- Maximum inrush current 500 mA (Δt = 1 ms at Us)
- Delay time range 0.2 s ... 60 s ±5 % (can be set for 27/28)
- Mounting position vertical or horizontal
- Degree of protection IP20
- Connection method Push-in connection
- Conductor cross-section flexible with ferrule and plastic sleeve 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
- Conductor cross-section AWG 24 ... 16
- Stop category 1
- Vibration (operation) 10 Hz ... 150 Hz, 2g
- ECLASS 11.0 27371819
- ECLASS 5.1 27371900
- ECLASS 7.0 27371819
- UNSPSC 20.0 39122205
- Inrush current min. 3 mA
- Description of the input non-safety-related
- Limit frequency min. 0 Hz
- Mechanical service life 10x 106 cycles
- Typical response time at US < 35 ms (automatic start)
- Restart time < 1 s (Boot time)
- Net weight 126.6 g
- Housing material PBT
- pluggable Yes
- Stripping length 8 mm
- Safety Integrity Level Claim Limit (SIL CL) 1 (up to SILCL 3 depending on the application)
- Rated insulation voltage 250 V AC
- ECLASS 4.0 40020600
- ECLASS 5.0 27371900
- ECLASS 9.0 27371819
- UNSPSC 13.2 39121501
- UNSPSC 21.0 39122205
- Sq. Total current 72 A2 (observe derating)
- Output fuse 6 A gL/gG (N/O contact)
- Typical release time at US < 20 ms (when controlled via S12 (only for undelayed contact 13/14))
- Assembly instructions See derating curve
- Housing color yellow
- Conductor cross-section flexible with ferrule without plastic sleeve 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
- Degree of pollution 2
- Shock 15g
- ECLASS 10.0.1 27371819
- ETIM 6.0 EC001449
- Mounting type DIN rail mounting
- Status display 5 x bi-color LED
- Conductor cross section flexible 0.2 mm² ... 1.5 mm²
- Safety Integrity Level (SIL) 1 (up to SIL 3 depending on the application)
- Standards/regulations DIN EN 50178
- Overvoltage category III
- REACh SVHC Lead 7439-92-1
- ECLASS 6.0 27371800
- UNSPSC 18.0 39122205
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 4.1 40020600
- ETIM 7.0 EC001449
- UNSPSC 19.0 39122205
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
2702095
Select Qty:
Average response time: 11 minutes
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨