2701551 Phoenix Contact Programmable Logic Controllers

2701551 Product Details

• ETIM 4.0
  EC001599
• UNSPSC 6.01
  43172015
• Ambient temperature (storage/transport)
  -25 °C ... 85 °C
• UNSPSC 18.0
  32151602
• Mounting type
  Wall mounting or DIN rail mounting; both with mounting plate.
• Note on the connection method
  D-coded
• Equipment type
  Sercos slave
• Connection technology
  3-conductor
• Nominal input voltage UIN
  24 V DC
• Output name
  Digital outputs
• Number of outputs
  4
• Output voltage when switched off
  max. 1 V
• Immunity to ESD
  Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge
• Immunity to conducted interference
  Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
• ECLASS 11.0
  27242604
• ECLASS 4.1
  27240400
• Width
  60 mm
• Drill hole spacing
  198.5 mm
• Permissible humidity (storage/transport)
  5 % ... 95 %
• Designation
  Actuators (UA)
Connection method
M12 connector, (A-coded)
Number
2
Specification
Sercos specification 1.1.2
Input name
Digital inputs
Input filter time
< 1000 µs
Output voltage
24 V
Reverse voltage resistance to short pulses
Reverse voltage proof
Immunity to burst
Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B, 2 kV
Mechanical tests
Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
ECLASS 10.0.1
27242604
ECLASS 6.0
27242600
ECLASS 4.0
27240400
Protective circuit
Overload protection, short-circuit protection of outputs yes
Number of inputs
8
Nominal output voltage
24 V DC (from voltage UA)
Nominal load, ohmic
48 W (48 Ω, with nominal voltage)
Immunity to EF
Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
Protection class
III (IEC 61140, EN 61140, VDE 0140-1)
ECLASS 5.1
27242600
Input voltage range "1" signal
11 V DC ... 30 V DC
Nominal input current at UIN
typ. 3 mA
Output current when switched off
max. 20 µA
Behavior with overload
Auto restart
Interference emission
Noise emission test as per EN 61000-6-4 Class A
China RoHS
Environmentally Friendly Use Period = 25;
ECLASS 5.0
27242200
ECLASS 9.0
27242604
ETIM 6.0
EC001599
ETIM 3.0
EC001599
UNSPSC 19.0
32151602
Description of the input
EN 61131-2 types 1 and 3
Input voltage range "0" signal
0 V ... 5 V DC
Nominal load, inductive
48 VA (1.2 H, 48 Ω, with nominal voltage)
Switching frequency
max. 5500 per second (with at least 50 mA load current)
Test section
24 V supply (communications power and sensor supply, digital inputs)/bus connection (Ethernet 1) 500 V AC 50 Hz 1 min.
REACh SVHC
Lead 7439-92-1
ETIM 2.0
EC001433
Air pressure (storage/transport)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Transmission speed
100 Mbps (with auto negotiation)
System-specific protocols
Sercos protocols Sercos
Supply voltage
24 V DC
Ambient temperature (operation)
-25 °C ... 60 °C
Air pressure (operation)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Degree of protection
IP65/IP67
Depth
38 mm
Housing material
Zinc die-cast
Net weight
708.1 g
Designation connection point
Copper cable
Height
185 mm
Note on dimensions
The height is 194.5 mm including the mounting plate. With fixing clips pulled out, the height is 212 mm. The depth is 38 mm including the mounting plate (30.5 mm without the mounting plate).
Permissible humidity (operation)
5 % ... 95 %
Device profile
FSP_IO
Supply voltage range
18 V DC ... 31.2 V DC (including all tolerances, including ripple)
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Number of positions
4
Protocols supported
HTTP
Current consumption
typ. 30 mA ±15 % (at 24 V DC)
ETIM 7.0
EC001599
UNSPSC 12.01
39121311
UNSPSC 21.0
32151602
UNSPSC 11
39121311
ECLASS 7.0
27242604
UNSPSC 7.0901
43201404
UNSPSC 20.0
32151602
UNSPSC 13.2
32151602
Immunity to surge
Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical)

Product condition