2701496 Phoenix Contact Programmable Logic Controllers

2701496 Product Details

• Connection method
  M12 connector, X01 ... X04 have double occupancy
• Supply voltage
  24 V DC
• Nominal input voltage UIN
  24 V DC
• Input voltage range "1" signal
  15 V DC ... 30 V DC
• Total sensor current
  max. 1.6 A (from L+/L-)
• Drill hole spacing
  198.5 mm
• Housing material
  Pocan®
• Color
  anthracite
• Input filter time
  < 1000 µs
• Sensor current per channel
  max. 200 mA (from L+/L-)
• ECLASS 11.0
  27242604
• Degree of protection
  IP65/IP67
• Designation
  Actuators (UA)
• Transmission speed
  10/100 Mbps (with auto negotiation)
• Equipment type
  EtherNet/IP™ slave
• Input name
  Digital inputs at pin 2 for type A ports
• Permissible humidity (operation)
  5 % ... 95 %
• Designation connection point
  Copper cable
• Protocols supported
  SNMP v1
• Description of the input
  IO-Link ports in digital input (DI) mode
Number of inputs
max. 8 (EN 61131-2 type 1)
Input voltage range "0" signal
-0.3 V DC ... 5 V DC
Number of positions
4
Specification
CIP Edition 3.11EIP adaptation of CIP 1.12
Supply voltage range
18 V DC ... 31.2 V DC (including all tolerances, including ripple)
Nominal input current
typ. 3 mA
Number of outputs
max. 8
Maximum output current per channel
150 mA
Mounting type
Wall mounting
Number
2
Net weight
552.8 g
Note on the connection method
D-coded
Current consumption
typ. 28 mA ±15 % (at 24 V DC)
Protective circuit
Overload protection, short-circuit protection of sensor supply
Input frequency
0.5 kHz
Nominal load, ohmic
3.6 W (160 Ω, at nominal load)
Permissible humidity (storage/transport)
5 % ... 95 %
ECLASS 4.1
27240400
ETIM 2.0
EC001433
UNSPSC 11
39121311
UNSPSC 6.01
43172015
Immunity to burst
Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B, 2 kV
UNSPSC 13.2
32151602
System-specific protocols
EtherNet/IP™ protocols ACD
Switching rate
1 per second, maximum (at nominal inductive load)
Width
60 mm
Ambient temperature (operation)
-25 °C ... 60 °C
Output description
IO-Link ports in digital output (DO) mode
Limitation of the voltage induced on circuit interruption
-15 V DC
ETIM 6.0
EC001599
Nominal input current at UIN
typ. 3 mA
Depth
30.5 mm
Test section
24 V supply (communications power and sensor supply, IO-Link ports)/bus connection (Ethernet 1) 500 V AC 50 Hz 1 min.
Ambient temperature (storage/transport)
-25 °C ... 85 °C
Air pressure (storage/transport)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Air pressure (operation)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Connection technology
3-conductor
Nominal load, inductive
3.6 VA (0.8 H, 160 Ω, at nominal load)
Maximum output current per device
1.2 A
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Note on dimensions
The height is 212 mm including fixing clips.
Height
185 mm
Type of protection
Overload protection
Interference emission
Noise emission test as per EN 61000-6-4 Class A
UNSPSC 18.0
32151602
Mechanical tests
Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
Signal delay
max. 150 µs (when switched on)
Behavior with overload
Shutdown with automatic restart
Immunity to conducted interference
Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
Immunity to EF
Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
ECLASS 5.1
27242600
ECLASS 7.0
27242604
UNSPSC 12.01
39121311
Immunity to surge
Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical)
ECLASS 4.0
27240400
ETIM 3.0
EC001599
UNSPSC 20.0
32151602
Output current when switched off
max. 300 µA
ECLASS 9.0
27242604
UNSPSC 7.0901
43201404
UNSPSC 19.0
32151602
Immunity to ESD
Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge
ECLASS 10.0.1
27242604
ECLASS 5.0
27242200
UNSPSC 21.0
32151602
Nominal output voltage
24 V DC
REACh SVHC
Lead 7439-92-1
China RoHS
Environmentally Friendly Use Period = 25;
ETIM 4.0
EC001599
ETIM 7.0
EC001599
Output voltage when switched off
max. 1 V
Protection class
III (IEC 61140, EN 61140, VDE 0140-1)
ECLASS 6.0
27242600

Product condition