2700548 Phoenix Contact Electrical Safety Devices
Part#:2700548
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
About the product: Safety relay for emergency stop and safety doors up to SILCL 3, Cat. 4, PL e, 1 or 2-channel operation, automatic or manual, monitored start, cross-circuit detection, 3 enabling current paths, US = 24 V DC, pluggable Push-in terminal block
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Electrical Safety Devices that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2700548 Phoenix Contact price in the box on the right side or send a quick quote.
2700548 Product Details
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Rated control circuit supply voltage US 24 V DC -15 % / +10 %
- Protective circuit Surge protection Suppressor diode
- Input current range "0" signal 0 mA ... 2 mA (for safe Off; at S12)
- Protective circuit/component Suppressor diode
- Switching capacity min. 60 mW
- Maximum inrush current 500 mA (Δt = 1 ms at Us)
- Typical release time at US < 20 ms (when controlled via A1 or S12 and S22.)
- Recovery time < 500 ms
- Mounting position vertical or horizontal
- Width 12.5 mm
- Max. permissible relative humidity (operation) 75 % (on average, 85% infrequently, non-condensing)
- Filter time max. 1.5 ms (at S12, S22; test pulse width)
- Input voltage range "0" signal 0 V DC ... 5 V DC (for safe Off; at S12)
- Input voltage range "1" signal 20.4 V DC ... 26.4 V DC
- Contact type 3 enabling current paths
- Switching frequency 0.5 Hz
- Voltage 22 V DC (Us - 2 V)
- Typical pickup time at US < 250 ms (when controlled via A1)
- Assembly instructions See derating curve
- Min. degree of protection of inst. location IP54
- Connection method Push-in connection
- Conductor cross section solid 0.2 mm² ... 1.5 mm²
- Category 4
- Degree of pollution 2
- REACh SVHC Lead 7439-92-1
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Maximum altitude ≤ 2000 m (Above sea level)
- Rated control supply current IS typ. 84 mA
- Input name Start circuit
- Max. permissible overall conductor resistance 150 Ω
- Output name Enabling current paths
- Switching voltage min. 12 V AC/DC
- Output fuse 6 A gL/gG (N/O contact)
- Current max. 100 mA
- Relay type Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
- Housing material PBT
- pluggable Yes
- Stop category 0
- Rated insulation voltage 250 V AC
- Overvoltage category III
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 5.1 27371900
- ETIM 7.0 EC001449
- Height 116.6 mm
- Ambient temperature (operation) -40 °C ... 55 °C (observe derating)
- Power consumption at US typ. 2 W
- Inrush current min. 3 mA
- Description of the input non-safety-related
- Contact material AgSnO2
- Number of outputs 1 (digital, PNP)
- Limiting continuous current 6 A (For 13/14)
- Typical response time at US < 175 ms (automatic start)
- Net weight 173.7 g
- Housing color yellow
- Conductor cross-section AWG 24 ... 16
- Performance level (PL) e (4 A DC13; 5 A AC15; 8760 switching cycles/year)
- Safety Integrity Level Claim Limit (SIL CL) 3
- ECLASS 4.1 40020600
- ECLASS 7.0 27371819
- UNSPSC 19.0 39122205
- ETIM 6.0 EC001449
- Depth 114.5 mm
- Max. permissible humidity (storage/transport) 75 % (on average, 85% infrequently, non-condensing)
- Designation Air clearances and creepage distances between the power circuits
- Number of inputs 1
- Current consumption < 10 mA (at S34/24 V)
- Output description non-safety-related
- Sq. Total current 72 A2 (observe derating)
- Mechanical service life 10x 106 cycles
- Short-circuit protection no
- Nominal operating mode 100% operating factor
- Mounting type DIN rail mounting
- Degree of protection IP20
- Operating voltage display 1 x green LED
- Conductor cross-section flexible with ferrule without plastic sleeve 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
- Safety Integrity Level (SIL) 3
- Standards/regulations DIN EN 50178
- Vibration (operation) 10 Hz ... 150 Hz, 2g
- ECLASS 4.0 40020600
- ECLASS 9.0 27371819
- UNSPSC 21.0 39122205
- Status display 3 x green LED
- Conductor cross section flexible 0.2 mm² ... 1.5 mm²
- Conductor cross-section flexible with ferrule and plastic sleeve 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
- Stripping length 8 mm
- Rated surge voltage/insulation Basic insulation 4 kV:Between input circuit and enabling current path (23/24/34)Between all current paths and housingSafe isolation, reinforced insulation 6 kV:Between input circuit and enabling current path (13/14)Between enabling current path (13/14) an
- Shock 15g
- ECLASS 11.0 27371819
- ECLASS 5.0 27371900
- UNSPSC 20.0 39122205
- ECLASS 10.0.1 27371819
- ECLASS 6.0 27371800
- UNSPSC 13.2 39121501
- UNSPSC 18.0 39122205
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
2700548
Select Qty:
Average response time: 11 minutes
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨