2700466 Phoenix Contact Electrical Safety Devices

Product Details

• Typical response time at US
  < 175 ms (automatic start)
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Rated control circuit supply voltage US
  24 V DC -15 % / +10 %
• Filter time
  max. 1.5 ms (at S12; test pulse width)
• Input voltage range "0" signal
  0 V DC ... 5 V DC (for safe Off; at S12)
• Output description
  non-safety-related
• Switching voltage
  min. 12 V AC/DC
• Current
  max. 100 mA
• Mounting position
  vertical or horizontal
• Housing color
  yellow
• Status display
  3 x green LED
• Screw thread
  M3
• Height
  112.2 mm
• Max. permissible humidity (storage/transport)
  75 % (on average, 85% infrequently, non-condensing)
• Power consumption at US
  typ. 1.92 W
• Input name
  Start circuit
• Depth
  114.5 mm
• Maximum altitude
  ≤ 2000 m (Above sea level)
• Rated control supply current IS
  typ. 80 mA
Description of the input
non-safety-related
Max. permissible overall conductor resistance
150 Ω
Number of inputs
1
Output name
Enabling current paths
Contact type
3 enabling current paths
Voltage
22 V DC (Us - 2 V)
Typical pickup time at US
< 250 ms (when controlled via A1)
Relay type
Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Housing material
PBT
Conductor cross section solid
0.2 mm² ... 2.5 mm²
Torque
0.5 Nm ... 0.6 Nm
Performance level (PL)
c (up to PL e depending on the application)
Standards/regulations
DIN EN 50178
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 11.0
27371819
ECLASS 7.0
27371819
UNSPSC 18.0
39122205
Width
12.5 mm
Max. permissible relative humidity (operation)
75 % (on average, 85% infrequently, non-condensing)
Inrush current
min. 3 mA
Input current range "0" signal
0 mA ... 2 mA (for safe Off; at S12)
Protective circuit/component
Suppressor diode
Switching frequency
0.5 Hz
Short-circuit protection
no
Nominal operating mode
100% operating factor
Mounting type
DIN rail mounting
Operating voltage display
1 x green LED
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
Category
1 (up to Cat. 4 depending on the application)
Degree of pollution
2
REACh SVHC
Lead 7439-92-1
ECLASS 5.0
27371900
UNSPSC 20.0
39122205
Ambient temperature (operation)
-40 °C ... 55 °C (observe derating)
Designation
Air clearances and creepage distances between the power circuits
Protective circuit
Surge protection Suppressor diode
Input voltage range "1" signal
20.4 V DC ... 26.4 V DC
Limiting continuous current
6 A (observe derating)
Sq. Total current
48 A2 (observe derating)
Maximum inrush current
500 mA (Δt = 1 ms at Us)
Typical release time at US
< 20 ms (when controlled via A1 or S12)
Net weight
140.4 g
Degree of protection
IP20
Connection method
Screw connection
Stripping length
7 mm
Safety Integrity Level (SIL)
1 (up to SIL 3 depending on the application)
Rated insulation voltage
250 V AC
Vibration (operation)
10 Hz ... 150 Hz, 2g
ECLASS 10.0.1
27371819
UNSPSC 13.2
39121501
Current consumption
< 10 mA (at S34/24 V)
Number of outputs
1 (digital, PNP)
Contact material
AgSnO2
Switching capacity
min. 60 mW
Mechanical service life
10x 106 cycles
Output fuse
6 A gL/gG (N/O contact)
Recovery time
< 500 ms
Assembly instructions
See derating curve
Min. degree of protection of inst. location
IP54
pluggable
Yes
Conductor cross-section AWG
24 ... 12
Stop category
0
Safety Integrity Level Claim Limit (SIL CL)
1 (up to SILCL 3 depending on the application)
Shock
15g
Conformance
CE-compliant
ECLASS 4.0
40020600
ECLASS 5.1
27371900
ECLASS 9.0
27371819
ETIM 6.0
EC001449
UNSPSC 19.0
39122205
Rated surge voltage/insulation
Safe isolation, reinforced insulation 6 kV between input circuit and enabling current path (13/14) and enabling current path (23/24) and enabling current path (33/34)Basic insulation 4 kV between all current paths and housing
Overvoltage category
III
ECLASS 4.1
40020600
ECLASS 6.0
27371800
ETIM 7.0
EC001449
UNSPSC 21.0
39122205