1713242 Phoenix Contact Electrical Connectors

1713242 Product Details

• Brief article description
  Panel feed-through terminal block
• Number of connections
  2
• Maximum load current
  232 A (with 95 mm² conductor cross section)
• Rated surge voltage (III/2)
  8 kV
• Conductor cross section flexible
  35 mm² ... 95 mm²
• Internal cylindrical gage
  A12 / B12
• Surface characteristics
  tin-plated
• Glow wire ignition temperature GWIT according to EN 60695-2-13
  775
• Pieces per package
  10
• Denomination packing units
  Pcs.
• Test for conductor damage and slackening
  IEC 60947-7-1:2009-04
• Minimum clearance - inhomogeneous field (III/2)
  8 mm
• Minimum creepage distance value (II/2)
  5.5 mm
• Safety note
  • WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prev
• Nominal current
  232 A
• Rated voltage (II/2)
  1000 V
• Rated surge voltage (II/2)
  6 kV
• 2 conductors with same cross section, flexible
  16 mm² ... 35 mm²
• Contact material
  Al alloy
• Glow wire flammability index GWFI according to EN 60695-2-12
  850
Caption
Type: UW 95-POT(-F)/S
Ambient temperature (operation)
-40 °C ... 100 °C (Depending on the current carrying capacity/derating curve)
Rated current
232 A
Conductor cross section
95 mm²
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Sweep speed
1 octave/min
Temperature
960 °C
ECLASS 5.0
27141100
ECLASS 7.0
27141134
Pitch
25 mm
Nom. voltage
1000 V
Rated surge voltage (III/3)
8 kV
Connection direction of the conductor to plug-in direction
0 °
Connection method
Cable lug connection
2 conductors with same cross section, flexible, with ferrule without plastic sleeve
16 mm² ... 35 mm²
Torque
10 Nm ... 12 Nm
Note
The cable entry funnel is not touch-proof. Never connect or disconnect the terminal when it is energized. Take appropriate steps to ensure touch proofness.
Insulating material group
I
CTI according to IEC 60112
600
Plate thickness
1 mm ... 4 mm
Type of note
Notes on safety
Pull-out test
IEC 60947-7-1:2009-04
Specification
IEC 60695-2-11:2014-02
Minimum creepage distance value (III/3)
12.5 mm
Frequency
10 - 150 - 10 Hz
Amplitude
0.35 mm (10 - 60.1 Hz)
ECLASS 10.0.1
27141134
ETIM 6.0
EC001283
Number of positions
1
Rated voltage (III/3)
1000 V
Single-conductor/terminal point multi-stranded
25 mm² ... 95 mm²
Conductor cross section, flexible, with ferrule, with plastic sleeve
25 mm² ... 95 mm²
Stripping length
27 mm
Housing color
gray (7042)
Flammability rating according to UL 94
V0
Width [ w ]
25 mm
Ambient temperature (assembly)
-5 °C ... 100 °C
Test specification
IEC 60947-7-1
Minimum clearance - inhomogeneous field (III/3)
8 mm
Minimum creepage distance value (III/2)
8 mm
Connection in acc. with standard
IEC 60947-7-1
Test duration per axis
2.5 h
ECLASS 11.0
27141134
ETIM 7.0
EC001283
Range of articles
UW 95-POT
Number of potentials
1
Rated voltage (III/2)
1000 V
Conductor cross section flexible, with ferrule without plastic sleeve
25 mm² ... 95 mm²
2 conductors with the same cross section, stranded
16 mm² ... 35 mm²
Cable lug connection according to standard
DIN 46234:1980-03 25 mm² 95 mm² M10 10 Nm 12 Nm
Insulating material
PA
Temperature for the ball pressure test according to EN 60695-10-2
125 °C
Type of packaging
packed in cardboard
Ambient temperature (storage/transport)
-40 °C ... 70 °C
Conductor cross section / conductor type / tensile force
25 mm² / solid / > 135 N
Clearances and creepage distances
IEC 60947-1:2007-06 + A1:2010-12
Minimum clearance - inhomogeneous field (II/2)
5.5 mm
Acceleration
5 g (60.1 - 150 Hz)
Time of exposure
30 s
ECLASS 6.0
27141100
ECLASS 5.1
27141100
ECLASS 9.0
27141134

Product condition