1528484 Phoenix Contact Data & Networking Devices

Product Details

• Cable structure
  2x2xAWG26/7; SF/UTP
• Degree of protection
  IP67
• Insulation resistance
  ≥ 500 MΩ*km
• Flammability rating according to UL 94
  V0
• Sealing material
  NBR
• External sheath, color
  water blue RAL 5021
• Cable weight
  42 kg/km
• Rated current at 40°C
  4 A (Plug/socket in accordance with IEC 61076-2-101, cable technical data is to be observed)
• Status display
  No
• Transmission characteristics (category)
  CAT5
• Material, knurls
  Nickel-plated brass
• Cable type
  Ethernet flexible CAT5, 2-pair
• Core diameter including insulation
  0.98 mm
• Outer sheath thickness
  1.2 mm
• Conductor structure signal line
  7x 0.16 mm
• Rated voltage
  48 V AC
• Test voltage
  2500 V
• Contact material
  CuZn
• Standards/specifications
  Electrical requirements EN 50288-2-2
• Safety note
  WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
Twisted pairs
2 cores to the pair
Current carrying capacity of cable
2 A (according to DIN VDE 0891-1)
Shielded
yes
ECLASS 4.1
27140800
ECLASS 5.0
27143400
Ambient temperature (operation)
-40 °C ... 80 °C (cable, fixed installation)
ETIM 4.0
EC000830
UNSPSC 20.0
39121413
Note
The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences ari
Coding
D - data
Overvoltage category
II
Contact carrier material
PA 6.6
Cable type (abbreviation)
93E
AWG signal line
26
Overall twist
Two pairs with two fillers to the core
External cable diameter D
6.4 mm ±0.2 mm
Material conductor insulation
Foamed PE
Attenuation
3.2 dB (with 1 MHz)
ECLASS 6.0
27279200
ETIM 2.0
EC001297
UNSPSC 6.01
31251501
UNSPSC 19.0
39121413
Cable capacity
approx. 45 nF/km (at 1 kHz)
ECLASS 10.0.1
27440102
ECLASS 5.1
27143400
Length of cable
0.5 m
Number of positions
4
Degree of pollution
3
Contact surface material
Ni/Au
UL AWM style
20963 (80°C/30 V)
Conductor cross section
2x 2x 0.14 mm²
ETIM 3.0
EC002061
UNSPSC 11
31251501
UNSPSC 21.0
39121413
Wire colors
white/orange-orange, white/green-green
Minimum bending radius, flexible installation
8 x D
ECLASS 4.0
27140800
ECLASS 7.0
27440103
ECLASS 9.0
27440102
UNSPSC 7.0901
31251501
UNSPSC 12.01
31251501
UNSPSC 18.0
39121413
ETIM 6.0
EC002061
UNSPSC 13.2
39121413
Halogen-free
according to IEC 60754-1
Ambient temperature (storage/transport)
-20 °C ... 80 °C
ECLASS 11.0
27440102
Outer sheath, material
PUR
Test voltage Core/Core
700 V (50 Hz, 1 min.)
China RoHS
Environmentally Friendly Use Period = 50 years
Nominal voltage, cable
≤ 100 V (Peak value, not for high-power applications)
Flame resistance
according to IEC 60332-1-2
Shielding
Aluminum-coated foil, tinned copper braided shield
Tensile strength GRP
≤ 80 N
Optical shield covering
70 %
Power-summated near end crosstalk attenuation (PSNEXT)
62.3 dB (with 1 MHz)
Coupling resistance
≤ 100.00 mΩ/m (at 10 MHz)
Standards/regulations
M12 connector IEC 61076-2-101
Minimum bending radius, fixed installation
4 x D
Test voltage Core/Shield
700 V (50 Hz, 1 min.)
Ambient temperature (installation)
-20 °C ... 80 °C
REACh SVHC
Lead 7439-92-1
Resistance to oil
according to EN 60811-2-1
Conductor material
Bare Cu litz wires
Return loss (RL)
23 dB (at 4 МHz)
Near end crosstalk attenuation (NEXT)
65.3 dB (with 1 MHz)
Signal type/category
Ethernet CAT5 (IEC 11801), 100 Mbps
Loop resistance
≤ 290.00 Ω/km
Signal runtime
5.3 ns/m
Wave impedance
100 Ω ±5 Ω (at 100 MHz)