1519561 Phoenix Contact Data & Networking Devices

1519561 Product Details

• Rated voltage
  48 V AC
• Number of positions
  2
• Mounting type
  Front mounting M16 x 1.5 With locking nut
• Conductor resistance
  ≤ 78.6 Ω/km
• Degree of pollution
  3
• Degree of protection
  IP67
• Rated current at 40°C
  4 A (Plug/socket in accordance with IEC 61076-2-101, cable technical data is to be observed)
• Status display
  No
• Connection method
  PROFIBUS
• UL AWM style
  21198 (80°C/300 V)
• Thread type
  M16 x 1.5
• Optical shield covering
  85 %
• Smallest bending radius, fixed installation
  40 mm
• Smallest bending radius, movable installation
  65 mm
• Cable type
  PROFIBUS
• Cable weight
  90 kg/km
• Conductor material
  Tin-plated Cu litz wires
• Material conductor insulation
  Foam-Skin PP
• Shielded
  yes
• China RoHS
  Environmentally Friendly Use Period = 50 years
ECLASS 9.0
27440102
UNSPSC 6.01
31251501
UNSPSC 19.0
39121413
Rated surge voltage
1.5 kV
Insertion/withdrawal cycles
> 100
Flammability rating according to UL 94
V0
External cable diameter D
7.8 mm ±0.2 mm
Bending radius
65 mm
Conductor structure signal line
19x 0.13 mm
Test voltage Core/Shield
1500 V (50 Hz, 1 min.)
Other resistance
Low adhesion
ECLASS 5.1
27143400
ECLASS 4.0
27140800
ETIM 4.0
EC000830
UNSPSC 18.0
39121413
UNSPSC 20.0
39121413
Overvoltage category
II
Cable type (abbreviation)
910
Overall twist
2 cores with 2 fillers to the core
Shielding
Plastic-coated aluminum foil, tinned copper braided shield
Material, filler
PP
Wave impedance
150 Ω ±10 % (3 MHz ... 20 MHz)
Contact carrier material
PA 6.6
Flame resistance
UL 1581, Sec. 1060 (FT-1)
REACh SVHC
Lead 7439-92-1
ECLASS 6.0
27279200
UNSPSC 7.0901
31251501
UNSPSC 12.01
31251501
Coding
B - inverse
Test voltage
2500 V
Sealing material
NBR
Signal type/category
PROFIBUS
Number of bending cycles
4000000
Acceleration
3 m/s²
ECLASS 11.0
27440102
Outer sheath, material
PUR
Ambient temperature (storage/transport)
-40 °C ... 80 °C
ECLASS 4.1
27140800
ETIM 2.0
EC001297
ETIM 6.0
EC002061
UNSPSC 11
31251501
UNSPSC 21.0
39121413
Conductor cross section
2x 0.25 mm² (Signal line)
External sheath, color
violet RAL 4001
Traversing path
4.5 m
Attenuation
≤ 0.049 dB/m (at 16 MHz)
Cable capacity
nom. 30 pF/m
Nominal voltage, cable
30 V
ETIM 3.0
EC002061
Halogen-free
in accordance with DIN VDE 0472 part 815
ECLASS 10.0.1
27440102
ECLASS 7.0
27440103
UNSPSC 13.2
39121413
Note
The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences ari
Standards/regulations
M12 connector IEC 61076-2-101
Contact surface material
Ni/Au
Safety note
WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
Test voltage Core/Core
1500 V (50 Hz, 1 min.)
Insulation resistance
≥ 5 GΩ*km
Length of cable
2 m
Standards/specifications
M12 connector IEC 61076-2-101
Traversing rate
3 m/s
Ambient temperature (operation)
-40 °C ... 80 °C (cable, fixed installation)
Material, knurls
Nickel-plated brass
Contact material
CuZn
AWG signal line
24
ECLASS 5.0
27143400
Wire colors
Red, green
Core diameter including insulation
2.55 mm ±0.07 mm
Cable structure
1x2xAWG24/19

Product condition