1437711 Phoenix Contact Data & Networking Devices
Part#:1437711
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
Bus system flush-type socket, Ethernet, 4-pos., M12, shielded, D-coded, SPEEDCON, rear/screw mounting with Pg9 thread, can be positioned, with 5.0 m bus cable, 2 x 2 x 0.2 mm²
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Data & Networking Devices that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 1437711 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Coding D - data
- Ambient temperature (operation) -40 °C ... 80 °C (cable, fixed installation)
- Standards/regulations M12 connector IEC 61076-2-101
- Standards/specifications Electrical requirements EN 50288-2-2
- Conductor cross section 2x 2x 0.14 mm²
- Overall twist Two pairs with two fillers to the core
- Outer sheath thickness 1.2 mm
- Contact carrier material PA 6.6
- Rated voltage 48 V AC
- Degree of pollution 3
- Safety note WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
- Conductor structure signal line 7x 0.16 mm
- Conductor material Bare Cu litz wires
- Halogen-free according to IEC 60754-1
- Length of cable 5 m
- Number of positions 4
- Transmission characteristics (category) CAT5
- Power-summated near end crosstalk attenuation (PSNEXT) 62.3 dB (with 1 MHz)
- Current carrying capacity of cable 2 A (according to DIN VDE 0891-1)
- ECLASS 11.0 27440102
- ECLASS 6.0 27279200
- Contact surface material Ni/Au
- ETIM 4.0 EC000830
- UNSPSC 11 31251501
- Cable type Ethernet flexible CAT5, 2-pair
- Cable type (abbreviation) 93E
- AWG signal line 26
- Shielding Aluminum-coated foil, tinned copper braided shield
- Cable weight 42 kg/km
- Rated current at 40°C 4 A (Plug/socket in accordance with IEC 61076-2-101, cable technical data is to be observed)
- Overvoltage category II
- Cable capacity approx. 45 nF/km (at 1 kHz)
- Attenuation 3.2 dB (with 1 MHz)
- Nominal voltage, cable ≤ 100 V (Peak value, not for high-power applications)
- Flame resistance according to IEC 60332-1-2
- Shielded yes
- Flammability rating according to UL 94 V0
- ECLASS 4.0 27140800
- ETIM 3.0 EC002061
- UNSPSC 6.01 31251501
- UNSPSC 18.0 39121413
- UL AWM style 20963 (80°C/30 V)
- Wave impedance 100 Ω ±5 Ω (at 100 MHz)
- Ambient temperature (storage/transport) -20 °C ... 80 °C
- China RoHS Environmentally Friendly Use Period = 50 years
- Degree of protection IP67 (When plugged in)
- Signal type/category Ethernet CAT5 (IEC 11801), 100 Mbps
- Contact material CuZn
- Material, knurls Nickel-plated brass
- Core diameter including insulation 0.98 mm
- External sheath, color water blue RAL 5021
- Loop resistance ≤ 290.00 Ω/km
- Signal runtime 5.3 ns/m
- Test voltage Core/Core 700 V (50 Hz, 1 min.)
- ECLASS 5.1 27143400
- ETIM 6.0 EC002061
- UNSPSC 13.2 39121413
- UNSPSC 21.0 39121413
- Sealing material NBR
- Cable structure 2x2xAWG26/7; SF/UTP
- Twisted pairs 2 cores to the pair
- External cable diameter D 6.4 mm ±0.2 mm
- Tensile strength GRP ≤ 80 N
- Outer sheath, material PUR
- Return loss (RL) 23 dB (at 4 МHz)
- ECLASS 10.0.1 27440102
- ECLASS 5.0 27143400
- ECLASS 9.0 27440102
- UNSPSC 20.0 39121413
- UNSPSC 12.01 31251501
- Material conductor insulation Foamed PE
- Insulation resistance ≥ 500 MΩ*km
- Near end crosstalk attenuation (NEXT) 65.3 dB (with 1 MHz)
- Coupling resistance ≤ 100.00 mΩ/m (at 10 MHz)
- ECLASS 4.1 27140800
- ECLASS 7.0 27440103
- UNSPSC 7.0901 31251501
- UNSPSC 19.0 39121413
- Minimum bending radius, flexible installation 8 x D
- Minimum bending radius, fixed installation 4 x D
- Wire colors white/orange-orange, white/green-green
- Optical shield covering 70 %
- Resistance to oil according to EN 60811-2-1
- REACh SVHC Lead 7439-92-1
- Ambient temperature (installation) -20 °C ... 80 °C
- Test voltage Core/Shield 700 V (50 Hz, 1 min.)
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
