Welcome to Quotebeam
Nikki Gonzales
Bryan Obida
Nick Goetz

Live support:

Monday - Friday 6AM - 6PM PST

1437614 Phoenix Contact Electrical Connectors

Phoenix Contact 1437614 Bus system flush-type female connector, INTERBUS, 5-pos., M12, shielded, B-coded, SPEEDCON, rear/screw mounting with Pg9 thread, with 1.0 m bus line
Phoenix Contact

Part#:1437614

Manufacturer:Phoenix Contact

Product Lifecycle:Active

Checking verified in-stock parts...

About the product: Bus system flush-type female connector, INTERBUS, 5-pos., M12, shielded, B-coded, SPEEDCON, rear/screw mounting with Pg9 thread, with 1.0 m bus line

About the manufacturer: Phoenix Contact develops and manufactures industrial electrical and electronic technology products that power, protect, connect and automate systems and equipment.

Check out the 1437614 Phoenix Contact price in the box on the right side or send a quick quote.

1437614 Product Details

  • Length of cable
    1 m
  • Rated surge voltage
    1.5 kV
  • Number of positions
    5
  • Contact material
    CuZn
  • Contact surface material
    Ni/Au
  • Material, knurls
    Nickel-plated brass
  • Conductor structure signal line
    32x 0.10 mm
  • Shielding
    Braided copper wires
  • Number of bending cycles
    5000000
  • Acceleration
    3.2 m/s²
  • Cable capacity
    ≤ 60 nF/km (At 800 Hz)
  • Test voltage Core/Shield
    1000 Vrms
  • ECLASS 4.0
    27140800
  • ECLASS 9.0
    27440102
  • UNSPSC 6.01
    31251501
  • Note
    The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences ari
  • Coding
    B - inverse
  • Insertion/withdrawal cycles
    > 100
  • Torque
    2 Nm ... 3 Nm (Installation-side)
  • Cable structure
    3 x 2 x 0.22 mm²
  • Twisted pairs
    2 cores to the pair
  • External cable diameter D
    8 mm
  • Cable weight
    70 kg/km
  • Material conductor insulation
    PE
  • Attenuation
    ≤ 15 dB/km (at 256 kHz)
  • Test voltage Core/Core
    1500 Vrms
  • China RoHS
    Environmentally Friendly Use Period = 50 years
  • ECLASS 11.0
    27440102
  • ETIM 3.0
    EC002061
  • UNSPSC 7.0901
    31251501
  • UNSPSC 18.0
    39121413
  • Degree of protection
    IP67 (When plugged in)
  • Insulation resistance
    ≥ 5 GΩ*km
  • Overvoltage category
    II
  • Contact carrier material
    PA 6.6
  • Cable type (abbreviation)
    900
  • Safety note
    WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
  • Wire colors
    Green-yellow, white-brown, gray-pink
  • Minimum bending radius, fixed installation
    7.5 x D
  • Traversing rate
    1.6 m/s
  • Conductor material
    Bare Cu litz wires
  • Signal speed
    0.66 c
  • REACh SVHC
    Lead 7439-92-1
  • ECLASS 4.1
    27140800
  • ECLASS 7.0
    27440103
  • UNSPSC 12.01
    31251501
  • Ambient temperature (operation)
    -40 °C ... 80 °C (cable, fixed installation)
  • Rated current at 40°C
    4 A (Plug/socket in accordance with IEC 61076-2-101, cable technical data is to be observed)
  • Signal type/category
    INTERBUS
  • Flammability rating according to UL 94
    V0
  • Sealing material
    FKM
  • Conductor cross section
    3x 2x 0.22 mm²
  • External sheath, color
    may green RAL 6017
  • Bending radius
    120 mm
  • Loop resistance
    ≤ 159.80 Ω/km
  • Near end crosstalk attenuation (NEXT)
    ≥ 61 dB (at 772 kHz)
  • Nominal voltage, cable
    250 V (Peak value, not for high-power applications)
  • Overall twist
    3 pairs to the core
  • Flame resistance
    according to VDE 0472, Part 4, test type B
  • ECLASS 5.1
    27143400
  • ETIM 6.0
    EC002061
  • UNSPSC 13.2
    39121413
  • UNSPSC 21.0
    39121413
  • Rated voltage
    48 V AC
  • Standards/regulations
    M12 connector IEC 61076-2-101
  • Degree of pollution
    3
  • Standards/specifications
    M12 connector IEC 61076-2-101
  • Cable type
    INTERBUS
  • AWG signal line
    24
  • Minimum bending radius, flexible installation
    15 x D
  • Traversing path
    10 m
  • Outer sheath, material
    PUR
  • Wave impedance
    120 Ω ±20 % (at 64 kHz)
  • Coupling resistance
    < 250.00 mΩ/m (at 30 MHz)
  • Shielded
    yes
  • ECLASS 10.0.1
    27440102
  • ECLASS 5.0
    27143400
  • ECLASS 6.0
    27279200
  • ETIM 4.0
    EC000830
  • UNSPSC 11
    31251501
  • UNSPSC 19.0
    39121413
  • UNSPSC 20.0
    39121413

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.

Shipping and Delivery Worldwide

calculate cost and time at Checkout


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo