1437588 Phoenix Contact Data & Networking Devices

1437588 Product Details

• Overvoltage category
  II
• Contact surface material
  Ni/Au
• Standards/specifications
  M12 connector IEC 61076-2-101
• Cable structure
  2xAWG24/19+2xAWG22/19
• Conductor structure, voltage supply
  19x 0.15 mm
• Coding
  A - standard
• REACh SVHC
  Lead 7439-92-1
• Number of positions
  5
• Degree of pollution
  3
• Contact material
  CuZn
• Conductor cross section
  2x 0.25 mm² (Data cable)
• Cable type (abbreviation)
  920
• AWG power supply
  22
• ECLASS 10.0.1
  27440102
• ECLASS 6.0
  27279200
• ETIM 4.0
  EC002061
• UNSPSC 12.01
  31251501
• UNSPSC 20.0
  39121413
• Rated surge voltage
  1.5 kV
• Connection method
  CAN Bus / DeviceNet
Contact carrier material
PA 6.6
Other resistance
Low adhesion
ECLASS 4.0
27140800
ECLASS 5.1
27143400
UNSPSC 6.01
31251501
UNSPSC 11
31251501
UNSPSC 21.0
39121413
Insertion/withdrawal cycles
> 100
Sealing material
FKM
Material, knurls
Zinc die-cast, nickel-plated
AWG signal line
24
Twisted pairs
2 cores to the pair
Cable type
CANopen®/DeviceNet™, PUR, violet
UL AWM style
21198 (80°C/300 V)
Wire colors
Red-black, blue-white
Shielded
yes
ECLASS 5.0
27143400
ETIM 6.0
EC002061
ETIM 3.0
EC002061
UNSPSC 19.0
39121413
Rated voltage
48 V AC
Signal type/category
CANopen®
Torque
2 Nm ... 3 Nm (Installation-side)
Ambient temperature (storage/transport)
-40 °C ... 80 °C
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.1
27140800
ECLASS 7.0
27440103
UNSPSC 13.2
39121413
Length of cable
2 m
Conductor structure signal line
19x 0.13 mm
Minimum bending radius, fixed installation
5 x D
Number of bending cycles
5000000
Cable weight
90 kg/km
Material conductor insulation
Foamed PE (Data cable)
Rated current at 40°C
4 A
Note
The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences ari
Overall twist
2 pairs around a drain wire in the center to the core
External sheath, color
violet RAL 4001
Minimum bending radius, drag chain applications
10 x D
Traversing path
4.5 m
Attenuation
≤ 22.9 dB/km (with 1 MHz)
Flame resistance
UL 1581, Sec. 1060 (FT-1)
Insulation resistance
≥ 5 GΩ*km (Data cable)
Type of pair shielding
Plastic-coated aluminum foil, aluminum side outside
Bending radius
70 mm
Acceleration
3 m/s²
Cable capacity
nom. 40 nF/km (Data cable)
Test voltage Core/Shield
2000 V (50 Hz, 1 min.)
Ambient temperature (operation)
-40 °C ... 80 °C (cable, fixed installation)
Core diameter including insulation
1.95 mm ±0.05 mm (Data cable)
Optical shield covering
80 %
Minimum bending radius, flexible installation
10 x D
Traversing rate
3 m/s
Conductor material
Tin-plated Cu litz wires
Wave impedance
120 Ω ±10 % (with 1 MHz)
Nominal voltage, cable
≤ 300 V (Peak value, not for high-power applications)
Flammability rating according to UL 94
V0
Safety note
WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
ECLASS 11.0
27440102
Degree of protection
IP67 (When plugged in)
Standards/regulations
M12 connector IEC 61076-2-101
Shielding
Tinned copper braided shield
External cable diameter D
6.7 mm ±0.3 mm
Outer sheath, material
PUR
Loop resistance
≤ 181.80 Ω/km (Data cable)
Test voltage Core/Core
2000 V (50 Hz, 1 min.)
Halogen-free
in accordance with DIN VDE 0472 part 815
ECLASS 9.0
27440102
UNSPSC 7.0901
31251501
UNSPSC 18.0
39121413

Product condition