1437533 Phoenix Contact Electrical Connectors

1437533 Product Details

• Rated current at 40°C
  4 A (Plug/socket in accordance with IEC 61076-2-101, cable technical data is to be observed)
• Standards/regulations
  M12 connector IEC 61076-2-101
• Overvoltage category
  II
• Sealing material
  FKM
• Cable structure
  2xAWG24/19+2xAWG22/19
• Core diameter including insulation
  1.95 mm ±0.05 mm (Data cable)
• External sheath, color
  violet RAL 4001
• Minimum bending radius, fixed installation
  5 x D
• Minimum bending radius, flexible installation
  10 x D
• Cable weight
  90 kg/km
• Cable capacity
  nom. 40 nF/km (Data cable)
• Test voltage Core/Shield
  2000 V (50 Hz, 1 min.)
• Other resistance
  Low adhesion
• ECLASS 4.1
  27140800
• ECLASS 7.0
  27440103
• ETIM 6.0
  EC002061
• UNSPSC 18.0
  39121413
• Ambient temperature (operation)
  -40 °C ... 80 °C (cable, fixed installation)
• Number of positions
  5
• Signal type/category
  CANopen®
Insertion/withdrawal cycles
> 100
Contact material
CuZn
Standards/specifications
M12 connector IEC 61076-2-101
Cable type (abbreviation)
920
Conductor structure signal line
19x 0.13 mm
Conductor structure, voltage supply
19x 0.15 mm
Shielding
Tinned copper braided shield
Optical shield covering
80 %
Minimum bending radius, drag chain applications
10 x D
Conductor material
Tin-plated Cu litz wires
Test voltage Core/Core
2000 V (50 Hz, 1 min.)
Attenuation
≤ 22.9 dB/km (with 1 MHz)
Shielded
yes
ECLASS 11.0
27440102
ECLASS 6.0
27279200
ETIM 3.0
EC002061
UNSPSC 12.01
31251501
UNSPSC 21.0
39121413
Note
The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences ari
Insulation resistance
≥ 5 GΩ*km (Data cable)
Connection method
CAN Bus / DeviceNet
Contact surface material
Ni/Au
Safety note
WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
UL AWM style
21198 (80°C/300 V)
AWG power supply
22
Type of pair shielding
Plastic-coated aluminum foil, aluminum side outside
External cable diameter D
6.7 mm ±0.3 mm
Acceleration
3 m/s²
Loop resistance
≤ 181.80 Ω/km (Data cable)
Nominal voltage, cable
≤ 300 V (Peak value, not for high-power applications)
Halogen-free
in accordance with DIN VDE 0472 part 815
REACh SVHC
Lead 7439-92-1
ECLASS 4.0
27140800
ETIM 4.0
EC000830
UNSPSC 6.01
31251501
UNSPSC 19.0
39121413
Degree of protection
IP67 (When plugged in)
Rated voltage
48 V AC
Flammability rating according to UL 94
V0
Material, knurls
Zinc die-cast, nickel-plated
AWG signal line
24
Twisted pairs
2 cores to the pair
Number of bending cycles
5000000
Traversing path
4.5 m
Outer sheath, material
PUR
Wave impedance
120 Ω ±10 % (with 1 MHz)
Ambient temperature (storage/transport)
-40 °C ... 80 °C
ECLASS 10.0.1
27440102
ECLASS 9.0
27440102
UNSPSC 11
31251501
UNSPSC 20.0
39121413
Length of cable
1 m
Rated surge voltage
1.5 kV
Coding
A - standard
Degree of pollution
3
Torque
2 Nm ... 3 Nm (Installation-side)
Contact carrier material
PA 6.6
Cable type
CANopen®/DeviceNet™, PUR, violet
Conductor cross section
2x 0.25 mm² (Data cable)
Wire colors
Red-black, blue-white
Overall twist
2 pairs around a drain wire in the center to the core
Bending radius
70 mm
Traversing rate
3 m/s
Material conductor insulation
Foamed PE (Data cable)
Flame resistance
UL 1581, Sec. 1060 (FT-1)
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.1
27143400
ECLASS 5.0
27143400
UNSPSC 7.0901
31251501
UNSPSC 13.2
39121413

Product condition