1415092 Phoenix Contact Terminal Blocks

Product Details

• Nominal cross section
  4 mm²
• Flammability rating according to UL 94
  V0
• Number of connections
  2
• Insulating material
  PA
• Insulating material group
  I
• Overvoltage category
  III
• Nominal voltage UN
  500 V
• Result of flexion and pull-out test
  Test passed
• Bending test conductor cross section/weight
  0.2 mm² / 0.2 kg
• Setpoint
  1 N
• Result of temperature-rise test
  Test passed
• Result of thermal test
  Test passed
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• Connection
  1 level
• Stripping length
  8 mm
• Conductor cross section solid max.
  4 mm²
• Number of levels
  1
• Rated surge voltage
  6 kV
• Nominal current IN
  32 A
Result of surge voltage test
Test passed
Result of power-frequency withstand voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tight fit on carrier
NS 15
Proof of thermal characteristics (needle flame) effective duration
30 s
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Note
Terminal point
Connection in acc. with standard
CSA
Tightening torque max
0.8 Nm
Min. AWG conductor cross section, flexible
24
Cross section with insertion bridge, stranded max.
2.5 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Potentials
1
Maximum load current
32 A (with 4 mm² conductor cross section)
Shock protection test specification
IEC 60529:2001-02
Bending test turns
135
Tensile test result
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Short-time current
0.48 kA
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
End cover width
2.5 mm
Screw thread
M3
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
2 conductors with same cross section, solid max.
1.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ETIM 2.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 12.01
39121410
UNSPSC 11
39121410
Color
blue
Degree of pollution
3
Open side panel
Yes
Power frequency withstand voltage setpoint
1.89 kV
Bending test rotation speed
10 rpm
Short circuit stability result
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Height NS 15
32 mm
Connection method
Screw connection
Tightening torque, min
0.6 Nm
Max. AWG conductor cross section, flexible
12
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
2 conductors with same cross section, solid min.
0.2 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141120
ECLASS 7.0
27141120
ETIM 7.0
EC000897
UNSPSC 18.0
39121410
Maximum power dissipation for nominal condition
1.02 W
Finger protection
guaranteed
Back of the hand protection
guaranteed
Result of tight fit on support
Test passed
Result of voltage-drop test
Test passed
Conductor cross section short circuit testing
4 mm²
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
6.2 mm
Length
28 mm
Conductor cross section AWG min.
24
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Cross section with insertion bridge, solid max.
4 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 4.0
27141100
ECLASS 5.1
27141100
ETIM 4.0
EC000897
UNSPSC 19.0
39121410
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Internal cylindrical gage
A4
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 11.0
27141120
ETIM 3.0
EC000897
ECLASS 9.0
27141120
UNSPSC 7.0901
39121410
UNSPSC 21.0
39121410
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 6.0
27141100
ECLASS 5.0
27141100
ETIM 6.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410