1415076 Phoenix Contact Terminal Blocks

Product Details

• Back of the hand protection
  guaranteed
• Bending test rotation speed
  10 rpm
• Result of tight fit on support
  Test passed
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  27,5 MJ/kg
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Note
  Terminal point
• Connection method
  Screw connection
• Connection in acc. with standard
  CSA
• Conductor cross section flexible min.
  0.2 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.25 mm²
• 2 conductors with same cross section, solid min.
  0.2 mm²
• ECLASS 6.0
  27141100
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Width
  6.2 mm
• Number of levels
  1
• Flammability rating according to UL 94
  V0
• Rated surge voltage
  6 kV
• Nominal current IN
  32 A
Nominal voltage UN
500 V
Result of power-frequency withstand voltage test
Test passed
Bending test turns
135
Conductor cross section short circuit testing
4 mm²
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Connection
1 level
Tightening torque max
0.8 Nm
Conductor cross section AWG min.
24
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141120
Number of connections
2
Insulating material
PA
Overvoltage category
III
Insulating material group
I
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Finger protection
guaranteed
Power frequency withstand voltage setpoint
1.89 kV
Tensile test result
Test passed
Result of voltage-drop test
Test passed
Result of thermal test
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
End cover width
1 mm
Screw thread
M3
Conductor cross section solid max.
4 mm²
Max. AWG conductor cross section, flexible
12
2 conductors with same cross section, stranded min.
0.2 mm²
Internal cylindrical gage
A4
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ECLASS 7.0
27141120
UNSPSC 6.01
30211811
UNSPSC 19.0
39121410
Result of surge voltage test
Test passed
Result of flexion and pull-out test
Test passed
Tight fit on carrier
NS 15
Result of temperature-rise test
Test passed
Short circuit stability result
Test passed
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 15
32 mm
Tightening torque, min
0.6 Nm
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141120
ECLASS 9.0
27141120
ETIM 6.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Color
gray
Degree of pollution
3
Maximum load current
32 A (with 4 mm² conductor cross section)
Open side panel
Yes
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Setpoint
1 N
Short-time current
0.48 kA
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Length
28 mm
Stripping length
8 mm
Conductor cross section solid min.
0.2 mm²
Min. AWG conductor cross section, flexible
24
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
2 conductors with same cross section, solid max.
1.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 5.0
27141100
ETIM 3.0
EC000897
UNSPSC 11
39121410
2 conductors with same cross section, stranded max.
1.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.1
27141100
ETIM 2.0
EC000897
ETIM 7.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410
ETIM 4.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410