1414129 Phoenix Contact Terminal Blocks

1414129 Product Details

• Insulating material
  PA
• Degree of pollution
  3
• Maximum load current
  17.5 A (with 1.5 mm² conductor cross section)
• Back of the hand protection
  guaranteed
• Number of levels
  2
• Color
  gray
• Flammability rating according to UL 94
  V0
• Connection in acc. with standard
  CSA
• Surge voltage test setpoint
  4.8 kV
• Bending test rotation speed
  10 rpm
• Conductor cross section tensile test
  1.5 mm²
• Result of voltage-drop test
  Test passed
• Nominal cross section
  1.5 mm²
• Maximum power dissipation for nominal condition
  0.56 W (the value is multiplied when connecting multiple levels)
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Power frequency withstand voltage setpoint
  1.89 kV
• Result of flexion and pull-out test
  Test passed
• Checking the mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Short circuit stability result
  Test passed
• Surface flammability NFPA 130 (ASTM E 162)
  passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Length
44 mm
Connection method
Screw connection
Conductor cross section flexible max.
1.5 mm²
2 conductors with same cross section, stranded min.
0.14 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ECLASS 7.0
27141120
ETIM 3.0
EC000897
UNSPSC 11
39121410
UNSPSC 13.2
39121410
UNSPSC 18.0
39121410
Rated surge voltage
4 kV
Nominal voltage UN
400 V
Open side panel
Yes
Result of power-frequency withstand voltage test
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Result of tight fit on support
Test passed
Tight fit on carrier
NS 35/NS 15
Short-time current
0.18 kA
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Width
4.2 mm
Height NS 15
41 mm
Conductor cross section AWG min.
26
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
2 conductors with same cross section, solid min.
0.14 mm²
2 conductors with same cross section, stranded max.
0.5 mm²
Internal cylindrical gage
A1
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 11.0
27141120
ECLASS 9.0
27141120
ETIM 6.0
EC000897
UNSPSC 6.01
30211811
Number of connections
4
Overvoltage category
III
Insulating material group
I
Nominal current IN
17.5 A
Finger protection
guaranteed
Bending test turns
135
Tractive force setpoint
40 N
Requirements, voltage drop
≤ 3.2 mV
Relative insulation material temperature index (Elec.; UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Conductor cross section solid min.
0.14 mm²
Conductor cross section AWG max.
16
Conductor cross section flexible, with ferrule without plastic sleeve max.
0.75 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
0.34 mm²
Tightening torque, min
0.22 Nm
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
REACh SVHC
Lead 7439-92-1
ECLASS 10.0.1
27141120
ECLASS 5.0
27141100
UNSPSC 7.0901
39121410
UNSPSC 21.0
39121410
Result of surge voltage test
Test passed
Tensile test result
Test passed
Setpoint
1 N
Conductor cross section short circuit testing
1.5 mm²
Proof of thermal characteristics (needle flame) effective duration
30 s
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/7,5
41 mm
Conductor cross section solid max.
1.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
0.75 mm²
Stripping length
6 mm
Tightening torque max
0.25 Nm
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 4.0
27141100
ECLASS 6.0
27141100
ETIM 4.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410
Result of temperature-rise test
Test passed
Result of thermal test
Test passed
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
End cover width
1 mm
Height NS 35/15
48.5 mm
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
2 conductors with same cross section, solid max.
0.5 mm²
Screw thread
M2
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.1
27141100
ETIM 2.0
EC000897
ETIM 7.0
EC000897
UNSPSC 19.0
39121410

Product condition