1413078 Phoenix Contact Terminal Blocks

Product Details

• Bending test rotation speed
  10 rpm
• Bending test conductor cross section/weight
  0.2 mm² / 0.2 kg
• Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
  1.5 mm²
• Tight fit on carrier
  NS 15
• Short circuit stability result
  Test passed
• Tightening torque max
  0.8 Nm
• Result of tight fit on support
  Test passed
• Result of temperature-rise test
  Test passed
• Result of thermal test
  Test passed
• Conductor cross section solid max.
  4 mm²
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Tensile test result
  Test passed
• Setpoint
  1 N
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
  0.5 mm²
• Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
  0.25 mm²
• End cover width
  1 mm
• 2 conductors with same cross section, solid min.
  0.2 mm²
• ECLASS 9.0
  27141120
• Conductor cross section AWG max.
  12
2 conductors with same cross section, stranded max.
1.5 mm²
Internal cylindrical gage
A3
2 conductors with same cross section, solid max.
1 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
Conductor cross section AWG min.
24
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Conductor cross section short circuit testing
4 mm²
Connection method
Screw connection
Conductor cross section flexible min.
0.2 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141120
ECLASS 4.0
27141100
ETIM 2.0
EC000897
UNSPSC 11
39121410
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Cross section with insertion bridge, stranded max.
2.5 mm²
REACh SVHC
Lead 7439-92-1
ECLASS 5.0
27141100
ETIM 3.0
EC000897
ETIM 7.0
EC000897
UNSPSC 18.0
39121410
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Tightening torque, min
0.6 Nm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible max.
2.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 7.0
27141120
ETIM 4.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 21.0
39121410
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
ECLASS 4.1
27141100
ECLASS 6.0
27141100
UNSPSC 6.01
30211811
UNSPSC 19.0
39121410
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.1
27141100
Number of levels
1
Insulating material
PA
Rated surge voltage
6 kV
Maximum load current
32 A (with 4 mm² conductor cross section)
Finger protection
guaranteed
Result of surge voltage test
Test passed
Bending test turns
135
Nominal cross section
2.5 mm²
Overvoltage category
III
Maximum power dissipation for nominal condition
0.77 W
Surge voltage test setpoint
7.2 kV
Result of voltage-drop test
Test passed
Flammability rating according to UL 94
V2
Insulating material group
I
Back of the hand protection
guaranteed
Power frequency withstand voltage setpoint
1.89 kV
Result of power-frequency withstand voltage test
Test passed
Tractive force setpoint
60 N
ECLASS 11.0
27141120
Degree of pollution
3
Nominal current IN
24 A
Open side panel
Yes
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Conductor cross section tensile test
4 mm²
Requirements, voltage drop
U1 ≤ 3.2 mV; U2 ≤ 1.5 x U1
Short-time current
0.48 kA
Conductor cross section solid min.
0.2 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
ETIM 6.0
EC000897
UNSPSC 12.01
39121410
Nominal voltage UN
500 V
Width
5.2 mm
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
Color
blue
Relative insulation material temperature index (Elec., UL 746 B)
125 °C
Length
28 mm
Screw thread
M3
Min. AWG conductor cross section, flexible
24
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
Stripping length
8 mm
Max. AWG conductor cross section, flexible
14
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Number of connections
2
Result of flexion and pull-out test
Test passed
Height NS 15
32 mm
2 conductors with same cross section, stranded min.
0.2 mm²
Potentials
1
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Connection
1 level
Cross section with insertion bridge, solid max.
2.5 mm²