1408684 Phoenix Contact Electrical Wires & Cables
Part#:1408684
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
Network cable, Ethernet CAT5 (100 Mbps), 4-position, shielded, Plug straight M12 SPEEDCON / IP67, coding: D, on Socket angled M12 SPEEDCON / IP67, coding: D, cable length: Free input (0.2 ... 40.0 m)
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Electrical Wires & Cables that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 1408684 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Twisted pairs 2 cores to the pair
- Shielding Aluminum-coated foil, tinned copper braided shield
- Minimum bending radius, flexible installation 8 x D
- Wave impedance 100 Ω ±5 Ω (at 100 MHz)
- Coupling resistance ≤ 100.00 mΩ/m (at 10 MHz)
- Test voltage Core/Shield 700 V (50 Hz, 1 min.)
- China RoHS Environmentally Friendly Use Period = 50 years
- Standards/regulations M12 connector IEC 61076-2-101
- Note This item is a network cable with a freely selectable cable type. The technical data for all possible cable types is listed in the table below.
- ECLASS 11.0 27060308
- ECLASS 9.0 27060308
- Conductor cross section 2x 2x 0.14 mm²
- Conductor material Bare Cu litz wires
- UNSPSC 7.0901 31251501
- UNSPSC 21.0 26121604
- Rated current at 40°C 4 A (Plug/socket in accordance with IEC 61076-2-101, cable technical data is to be observed)
- ECLASS 10.0.1 27060308
- Core diameter including insulation 0.98 mm
- External sheath, color water blue RAL 5021
- Minimum bending radius, fixed installation 4 x D
- Loop resistance ≤ 290.00 Ω/km
- Near end crosstalk attenuation (NEXT) 65.3 dB (with 1 MHz)
- Attenuation 3.2 dB (with 1 MHz)
- Flame resistance according to IEC 60332-1-2
- Ambient temperature (storage/transport) -20 °C ... 80 °C
- Degree of protection IP65
- Number of positions 4
- Transmission characteristics (category) CAT5
- Material (component) CuZn (Contact)
- ECLASS 6.0 27061800
- ECLASS 5.0 19030300
- Color black
- Cable type Ethernet flexible CAT5, 2-pair
- Rated voltage 48 V AC
- Contact material CuSn
- Coding D (Data)
- Torque 0.4 Nm
- Cable type (abbreviation) 93E
- AWG signal line 26
- External cable diameter D 6.4 mm ±0.2 mm
- Tensile strength GRP ≤ 80 N
- Outer sheath, material PUR
- Resistance to oil according to EN 60811-2-1
- Insulation resistance ≥ 500 MΩ*km
- Standards/specifications Electrical requirements EN 50288-2-2
- Outer sheath thickness 1.2 mm
- Cable weight 42 kg/km
- Cable capacity approx. 45 nF/km (at 1 kHz)
- Signal runtime 5.3 ns/m
- Ambient temperature (installation) -20 °C ... 80 °C
- Head type Socket angled M12 SPEEDCON / IP67
- UL AWM style 20963 (80°C/30 V)
- Optical shield covering 70 %
- Material conductor insulation Foamed PE
- Return loss (RL) 23 dB (at 4 МHz)
- Test voltage Core/Core 700 V (50 Hz, 1 min.)
- Insertion/withdrawal cycles ≥ 100
- ECLASS 4.0 24010400
- ECLASS 7.0 27061801
- UNSPSC 12.01 31251501
- UNSPSC 18.0 26121604
- Ambient temperature (operation) -40 °C ... 80 °C (cable, fixed installation)
- Signal type/category Ethernet CAT5 (IEC 11801), 100 Mbps
- ETIM 4.0 EC002599
- Length of cable Free input (0.2 ... 40.0 m)
- ECLASS 4.1 24010400
- UNSPSC 6.01 31251501
- ETIM 7.0 EC003249
- UNSPSC 20.0 26121604
- Nominal voltage, cable ≤ 100 V (Peak value, not for high-power applications)
- REACh SVHC Lead 7439-92-1
- ETIM 3.0 EC001855
- UNSPSC 11 31251501
- UNSPSC 19.0 26121604
- Current carrying capacity of cable 2 A (according to DIN VDE 0891-1)
- Halogen-free according to IEC 60754-1
- Shielded yes
- ECLASS 5.1 19030300
- ETIM 6.0 EC000830
- UNSPSC 13.2 31251501
- Conductor structure signal line 7x 0.16 mm
- Contact carrier material TPU GF
- Cable structure 2x2xAWG26/7; SF/UTP
- Overall twist Two pairs with two fillers to the core
- Transmission speed 100 Mbps
- Wire colors white/orange-orange, white/green-green
- Power-summated near end crosstalk attenuation (PSNEXT) 62.3 dB (with 1 MHz)
- Contact surface material Ni/Au
- No. of positions (pin connector pattern) 4
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨