1407506 Phoenix Contact Electrical Connectors

Product Details

• Note
  The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences ari
• Insulation resistance
  ≥ 5 GΩ*km
• Overvoltage category
  III
• Degree of protection
  IP67
• Rated surge voltage
  0.8 kV
• Coding
  Y - hybrid
• Standards/regulations
  M12 connector IEC 61076-2-113
• Thread type
  M16 x 1.5
• Contact material
  CuZn
• Sealing material
  FKM
• UL AWM style
  20963 (80°C/30 V)
• Conductor structure, voltage supply
  19x 0.20 mm
• Optical shield covering
  85 %
• Minimum bending radius, flexible installation
  10 x D
• Tensile strength GRP
  70 N (in accordance with DIN EN 50565-1 for flexible installation)
• Loop resistance
  ≤ 280.00 Ω/km (Data)
• Differential impedance
  100 Ω ±5 % (at 100 MHz)
• Halogen-free
  according to IEC 60754
• Other resistance
  Low adhesion
• Ambient temperature (operation)
  -40 °C ... 90 °C (cable, fixed installation)
Number of positions
8
Signal type/category
Ethernet hybrid CAT5 (IEC 11801), 100 Mbps
Degree of pollution
3
Transmission characteristics (category)
CAT5 (IEC 11801:2002)
Material
Zinc die-cast (nickel-plated)
Cable type
Ethernet hybrid
Conductor cross section
4x 0.15 mm² (Data)
Wire colors
White/orange, orange, white/green, green, white, blue, brown, black
External sheath, color
black RAL 9005
Traversing rate
3 m/s
Cable weight
87 kg/km
Working capacitance
nom. 50 nF (per kilometer)
Test voltage Core/Shield
1500 V (50 Hz, 1 min.)
Resistance to oil
according to IEC 60811-2-1
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.1
27140800
UNSPSC 6.01
31251501
UNSPSC 21.0
39121413
UNSPSC 19.0
39121413
Rated voltage
48 V AC (Power and data)
Rated current at 40°C
0.5 A (Data)
Insertion/withdrawal cycles
≥ 100
Mounting type
Rear mounting M16 x 1.5
Contact surface material
Au
Safety note
WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
AWG signal line
26
Core diameter including insulation
1.05 mm (Data)
Number of bending cycles
2000000
Acceleration
3 m/s²
Outer sheath, material
PUR
Wave impedance
100 Ω ±15 Ω (4 MHz ... 100 MHz)
Attenuation
6 dB (at 4 МHz)
Flame resistance
in acc. with UL 1581, section 1061
Shielded
yes
ECLASS 4.0
27140800
ECLASS 6.0
27279200
ETIM 6.0
EC002061
UNSPSC 18.0
39121413
Length of cable
2 m
Standards/specifications
M12 connector IEC 61076-2-113
Cable structure
1x4xAWG26+1x4xAWG20
Conductor structure signal line
19x 0.10 mm
Shielding
Tinned copper braided shield
Minimum bending radius, fixed installation
5 x D
Traversing path
4.5 m
Conductor material
Bare Cu litz wires
Shield attenuation
≥ 80 dB (30 MHz ... 125 MHz)
Test voltage Core/Core
1500 V (50 Hz, 1 min.)
REACh SVHC
Lead 7439-92-1
ECLASS 5.0
27143400
ETIM 3.0
EC001855
ETIM 4.0
EC001855
UNSPSC 11
31251501
Torque
2 Nm ... 3 Nm
Flammability rating according to UL 94
V0
Contact carrier material
PPA
Cable type (abbreviation)
94H
AWG power supply
20
Overall twist
1 star quad and 4 wires with 2 fillers
External cable diameter D
7.6 mm ±0.2 mm
Material conductor insulation
PP (Data)
Near end crosstalk attenuation (NEXT)
56.3 dB (at 4 МHz)
Special properties
Free of substances which would hinder coating with paint or varnish
Nominal voltage, cable
≤ 50 V (Peak value, not for high-power applications)
ECLASS 11.0
27440102
ECLASS 5.1
27143400
ECLASS 9.0
27440102
UNSPSC 13.2
39121413
UNSPSC 20.0
39121413
UNSPSC 12.01
31251501
ECLASS 7.0
27440103
ECLASS 10.0.1
27440102
Minimum bending radius, drag chain applications
10 x D
UNSPSC 7.0901
31251501