Welcome to Quotebeam
Nikki Gonzales
Bryan Obida
Nick Goetz

Live support:

Monday - Friday 6AM - 6PM PST

1217839 Phoenix Contact Electrical Safety Devices

Phoenix Contact 1217839 Set of 35 safety relays for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, automatic or manual activation, 2 N/O contacts with a dropout delay of 0.1 s to 30 s, plug-in screw connection terminal bloc
Phoenix Contact

Part#:1217839

Manufacturer:Phoenix Contact

Product Lifecycle:Active

Checking verified in-stock parts...

About the product: Set of 35 safety relays for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, automatic or manual activation, 2 N/O contacts with a dropout delay of 0.1 s to 30 s, plug-in screw connection terminal bloc

About the manufacturer: Phoenix Contact develops and manufactures industrial electrical and electronic technology products that power, protect, connect and automate systems and equipment.

Check out the 1217839 Phoenix Contact price in the box on the right side or send a quick quote.

1217839 Product Details

  • Height
    99 mm
  • Input voltage range in reference to UN
    0.85 ... 1.1
  • Typical release time
    20 ms (Undelayed contacts)
  • Max. permissible overall conductor resistance
    500 Ω (Input and reset circuit at UN)
  • Limiting continuous current
    6 A (N/O contact)
  • Interrupting rating (ohmic load) max.
    144 W (24 V DC, τ = 0 ms)
  • Mechanical service life
    approx. 107 cycles
  • Mounting type
    DIN rail mounting
  • Min. degree of protection of inst. location
    IP54
  • Conductor cross section AWG min.
    24
  • Designation
    Air clearances and creepage distances between the power circuits
  • Standards/regulations
    DIN EN 60947-1
  • REACh SVHC
    Lead 7439-92-1
  • ECLASS 11.0
    27371819
  • Width
    22.5 mm
  • Ambient temperature (storage/transport)
    -40 °C ... 70 °C
  • Nominal input voltage UN
    24 V DC
  • Voltage at input/start and feedback circuit
    approx. 24 V DC
  • Protective circuit
    Suppressor diode, 33 V DC
  • Inrush current, minimum
    25 mA
  • Switching capacity min.
    0.4 W
  • Relay type
    Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
  • Conductor cross section solid min.
    0.2 mm²
  • Stop category
    0
  • Category
    4
  • Safety Integrity Level Claim Limit (SIL CL)
    3
  • Rated surge voltage/insulation
    4 kV / basic insulation
  • ECLASS 9.0
    27371819
  • Max. permissible humidity (storage/transport)
    75 % (on average, 85% infrequently, non-condensing)
  • Recovery time
    330 ms (Restart)
  • Status display
    LED K1/K2 and K3(t)/K4(t), green
  • Maximum switching voltage
    250 V AC/DC
  • Maximum interrupting rating (inductive load)
    42 W (24 V DC, τ = 40 ms)
  • Nominal operating mode
    100% operating factor
  • Net weight
    6500 g
  • Housing material
    PBT
  • Conductor cross section flexible max.
    2.5 mm²
  • Stripping length
    7 mm
  • Performance level (PL)
    e
  • Overvoltage category
    II
  • ECLASS 10.0.1
    27371819
  • Utilization restriction
    EMC: class A product, see manufacturer's declaration in the download area
  • Depth
    114.5 mm
  • Max. permissible relative humidity (operation)
    75 % (on average, 85% infrequently, non-condensing)
  • Typical input current at UN
    75 mA DC
  • Typical release time range
    0.1 s ... 30 s
  • Contact type
    4 enabling current paths
  • Maximum inrush current
    6 A
  • Switching capacity (360/h cycles)
    on request
  • Degree of protection
    IP20
  • Conductor cross section solid max.
    2.5 mm²
  • Conductor cross section flexible min.
    0.2 mm²
  • Conductor cross section AWG max.
    12
  • Safety Integrity Level (SIL)
    3
  • Degree of pollution
    2
  • Vibration (operation)
    10 Hz ... 150 Hz, 2g
  • Ambient temperature (operation)
    -20 °C ... 45 °C
  • Maximum altitude
    ≤ 2000 m (Above sea level)
  • Typical response time
    150 ms (Monitored/manual and auto-start)
  • Operating voltage display
    Green LED
  • Contact material
    AgSnO2
  • Minimum switching voltage
    15 V AC/DC
  • Sq. Total current
    120 A2 (see to derating)
  • Output fuse
    10 A gL/gG NEOZED (N/O contact)
  • Mounting position
    any
  • Connection method
    Screw connection
  • pluggable
    Yes
  • Screw thread
    M3
  • Rated insulation voltage
    250 V
  • Shock
    15g

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.

Shipping and Delivery Worldwide

calculate cost and time at Checkout


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo