1197654 Phoenix Contact Electrical Wires & Cables

1197654 Product Details

• Current carrying capacity per slot
  2 A
• Degree of protection
  IP67
• Conductor cross section AWG max. (signal)
  16
• Stripping length (signal)
  10 mm
• Stripping length
  70 mm (Master cable)
• Housing material
  PBT
• Sealing material
  CR/NBR (Cable gland)
• Total rated current
  8 A
• Sensor/actuator connection system
  M8 socket
• Conductor cross section min. (signal)
  0.2 mm²
• Conductor cross section min. (energy)
  0.2 mm²
• Conductor cross section max. (energy)
  1.5 mm²
• Material of contact surface, master cable side
  tin-plated
• ECLASS 11.0
  27440111
• Max. operating voltage Umax
  30 V DC
• Number of positions
  3
• Ambient temperature (operation)
  -25 °C ... 80 °C
• Conductor cross section AWG min. (signal)
  24
• Conductor cross section AWG max. (energy)
  16
• Wrench size, union nut
  24 mm
Tightening torque, union nut
2.5 Nm
Material of the contact carrier on the master cable side
PA
ECLASS 9.0
27440108
Current carrying capacity per I/O signal
2 A
Number of slots
6
Conductor cross section max. (signal)
1.5 mm²
Tightening torque, cover screw
1 Nm
Minimum external conductor diameter
6 mm
Slot/position = Wire color or connection
1 / 4 (A) = 1 / 4
Material
PA 6 (Cable gland)
Rated voltage
24 V DC
Flammability rating according to UL 94
V0
Note
NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties.
Connection method
Plug-in push-in spring-cage connection
Conductor cross section AWG min. (energy)
24
Maximum external conductor diameter
12 mm
Material of contact, master cable side
CU alloy
ECLASS 10.0.1
27440111

Product condition