1190012 Phoenix Contact Programmable Logic Controllers

1190012 Product Details

• Height
  62.2 mm
• Permissible humidity (storage/transport)
  5 % ... 95 % (non-condensing)
• Degree of protection
  IP20
• Conductor cross section solid max.
  1.5 mm²
• Conductor cross section AWG min.
  24
• Cable length
  max. 200 m (200 m from the clock output to the safe input (total based on forward and return path))
• Nominal voltage UN
  24 V DC (from UP)
• Short-circuit protection
  Yes
• Mounting position
  any
• Supply voltage range
  19.2 V DC ... 30 V DC (including all tolerances, including ripple)
• Category
  3 (1-channel assignment)
• Immunity to burst
  Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion A, 2 kV
• Protection class
  III (IEC 61140, EN 61140, VDE 0140-1)
• ECLASS 9.0
  27242604
• Caption
  Dimensions
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Air pressure (storage/transport)
  66 kPa ... 108 kPa
• Designation
  EN 62061
• Number
  1
• Connection technology
  3-conductor
Number of inputs
8 (1-channel assignment)
Input current range "0" signal
max. 1.5 mA
Limiting continuous current
max. 0.5 A DC (per clock output)
Operating mode
SafetyBridge
Maximum altitude
≤ 3000 m (Above sea level)
Protection
external fusing via the system in which the Smart Element is used
Immunity to surge
Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Test intensity 2, Criterion APower supply: 0.5 kV/0.5 kV (symmetrical/unsymmetrical)Signal lines: 1.0 kV/2.0 kV (symmetrical/unsymmetrical)
Overvoltage category
II (IEC 60664-1)
Depth
62 mm
Air pressure (operation)
70 kPa ... 108 kPa
Note on the connection method
Note the specification in the section Conductor cross sections, and stripping and insertion lengths.
Conductor cross section AWG max.
16
Transmission speed
See system in which you use the Smart Element.
Protective circuit
Surge protection of the supply voltage electronic (35 V, 0.5 s)
Nominal input current at UIN
typ. 2.7 mA
Input current range “1“ signal
min. 2 mA
Mounting type
Smart Element slot
Net weight
36 g
Power consumption
min. 154 mW
Performance level (PL)
d (1-channel assignment)
Immunity to EF
Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
Air clearances and creepage distances
IEC 60664-1
ECLASS 10.0.1
27242604
Width
14.9 mm
Permissible humidity (operation)
5 % ... 95 % (non-condensing)
Connection method
Push-in connection
Conductor cross section solid min.
0.25 mm²
Conductor cross section flexible min.
0.25 mm²
Description of the input
EN 61131-2, type 3
Nominal input voltage UIN
24 V DC
Input filter time
1.5 ms
Input voltage range "1" signal
11 V DC ... 30 V DC
Switching frequency
max. 10 Hz
Degree of pollution
2 (EN 60664-1)
Current consumption
min. 8 mA (Power supply from Up with 19.2 V DC, all inputs set, without power supply to the sensors via clock supplies OUT_T1 and OUT_T2)
Safety Integrity Level Claim Limit (SIL CL)
2 (1-channel assignment)
Immunity to ESD
Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion A, 6 kV contact discharge, 8 kV air discharge
Immunity to conducted interference
Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
ECLASS 11.0
27242604
Conductor cross section flexible max.
1.5 mm²
Stripping length
8 mm
Input voltage range "0" signal
-3 V DC ... 5 V DC
Ambient temperature (operation)
-25 °C ... 60 °C
Degree of protection at installation location
min. IP54
Input name
Safe digital inputs
Number of outputs
2
Color
zinc yellow RAL 1018
Supply voltage
24 V DC (using card edge connectors)
Additional text
using card edge connectors
Safety Integrity Level (SIL)
2 (1-channel assignment)
Interference emission
Noise emission test as per EN 61000-6-4 Class A (industrial applications)
Mechanical tests
Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g

Product condition