1135067 Phoenix Contact Terminal Blocks

1135067 Product Details

• Number of levels
  1
• Color
  gray
• Maximum power dissipation for nominal condition
  1.02 W
• Nominal voltage UN
  400 V (the voltage is determined by the fuse used)
• Width
  6.2 mm
• Operating temperature
  -60 °C ... 105 °C (max. short-term operating temperature 130°C)
• Ambient temperature (assembly)
  -5 °C ... 70 °C
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  4 mm²
• Number of connections
  2
• Rated surge voltage
  6 kV
• Degree of pollution
  3
• Fuse
  Type F (miniature)
• End cover width
  2.2 mm
• Height NS 35/7,5
  36.5 mm
• Conductor cross section flexible min.
  0.2 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.25 mm²
• Conductor cross section flexible, with ferrule with plastic sleeve min.
  0.25 mm²
• Stripping length
  10 mm ... 12 mm
• ECLASS 5.1
  27141100
• ETIM 3.0
  EC000899
UNSPSC 7.0901
39121410
UNSPSC 21.0
39121410
Nominal cross section
4 mm²
Overvoltage category
III
Maximum current with single arrangement
15 A
Open side panel
Yes
Height NS 35/15
44 mm
Conductor cross section solid min.
0.2 mm²
Conductor cross section AWG max.
10
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Connection method
Push-in connection
ECLASS 7.0
27141116
ECLASS 6.0
27141100
ETIM 4.0
EC000899
UNSPSC 13.2
39121410
Note
The current is determined by the fuse used, the voltage by the selected LED.15 A for single arrangement, 10 A for group arrangement. Derating curve available on request. The recommended continuous load capacity of the fuse inserts according to DIN 72581/P
Flammability rating according to UL 94
V0
Maximum load current
15 A (with 6 mm² conductor cross section, rigid)
Fuse type
Flat
Length
56 mm
Ambient temperature (actuation)
-5 °C ... 70 °C
Conductor cross section flexible max.
6 mm²
Conductor cross section AWG min.
24
Internal cylindrical gage
A4
ECLASS 4.0
27141116
ECLASS 9.0
27141116
UNSPSC 6.01
30211811
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410
Insulating material
PA
Insulating material group
I
Nominal current IN
10 A (the current is determined by the fuse used)
Height
35.3 mm
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Permissible humidity (storage/transport)
30 % ... 70 %
Conductor cross section solid max.
6 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
ECLASS 11.0
27141116
ECLASS 4.1
27141116
ETIM 6.0
EC000899
UNSPSC 11
39121410
UNSPSC 19.0
39121410
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
ECLASS 10.0.1
27141116
ECLASS 5.0
27141116
ETIM 2.0
EC000897
ETIM 7.0
EC000899
UNSPSC 18.0
39121410

Product condition