1130331 Phoenix Contact Electrical Wires & Cables

Product Details

• Application
  For charging electric vehicles (EV) with direct current (DC)
• Standards/regulations
  DIN EN 60751
• Normative cable length restrictions
  NOTE: Cable management may be required.
• Design
  D-Line 1.1
• Depth
  267 mm (Vehicle charging connector)
• Width
  75 mm (Vehicle charging connector)
• Max. altitude
  5000 m (above sea level)
• Rated current for signal contacts
  2 A
• Temperature monitoring
  2x Pt 1000
• Housing color
  black
• Flammability rating
  V0
• Wiring standards/regulations
  DIN EN 50620
• External cable diameter
  32 mm ±0.4 mm
• Cable resistance
  ≤ 0.000272 Ω/m (based on a power core, at an ambient temperature of 20°C)
• Tolerance at the sensor with the recommended measured current
  ±1K
• REACh SVHC
  Lead 7439-92-1
• Type
  DC charging cable
• Charging mode
  Mode 4
• Ambient temperature (operation)
  -30 °C ... 50 °C
• Rated current of power contacts
  250 A
Rated voltage for signal contacts
30 V AC
Type of signal transmission
Pulse width modulation with modulated Powerline communication according to ISO/IEC 15118 / DIN SPEC 70121
Mating face color
black
Material mating face
Plastic
Wiring certifications
VDE-Reg. 8798
Type of conductor
straight
External sheath, color
black
Recommended measured current
1 mA (1 V at 0°C)
Shutdown temperature
90 °C equivalent to a Pt 1000 value of 1346.5 Ω
Long-term stability (max. R0-Drift)
0.06 % (After 1000 hours at 130°C)
ECLASS 9.0
27144705
Charging standard
CCS type 2
Height
139 mm (Vehicle charging connector)
Number of power contacts
3 (PE, DC+, DC-)
Rated voltage for power contacts
1000 V DC
Note on the connection method
Crimp connection, cannot be disconnected
Withdrawal force
< 100 N
Color handle area
black
Wiring class
Class 6
Cable weight
max. 2300 kg/km
Temperature coefficient (TCR)
3850 ppm/K
ECLASS 11.0
27144705
Affixed logo
“PHOENIX CONTACT” logo
Conductor length
6 m
Degree of protection
IP44 (plugged in; when plugged in and ready to operate, the degree of protection is only ensued if both plug-in components are original products from Phoenix Contact or suitable standard-compliant products)
Number of signal contacts
2 (CP, PP)
Insertion force
< 100 N
Design line
Standard
Housing material
Plastic
Material handle area
Plastic
Outer sheath, material
TPE-U
Minimum bending radius
320 mm (10 x diameter)
Temperature range
-50 °C ... 130 °C
ECLASS 10.0.1
27144705
Stripping length
140 mm ±10 mm
Ambient temperature (storage/transport)
-40 °C ... 80 °C
Maximum charging power
250 kW
Resistor coding
1500 Ω (between PE and PP)
Insertion/withdrawal cycles
> 10000
Label
14.1 mm x 44.8 mm (customer logo on request)
Cable structure
2 x 70 mm² + 1 x 35 mm² + 3 x 2 x 0.75 mm²
Type of sensor
Pt 1000
China RoHS
Environmentally Friendly Use Period = 10;