1110386 Phoenix Contact Terminal Blocks

1110386 Product Details

• Number of levels
  1
• Color
  gray
• Number of positions
  1
• Flammability rating according to UL 94
  V0
• Nominal current IN
  353 A (with 185 mm² conductor cross section)
• Maximum power dissipation for nominal condition
  11.3 W
• Result of surge voltage test
  Test passed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Result of voltage-drop test
  Test passed
• Result of temperature-rise test
  Test passed
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Acceleration
  30g
• Number of shocks per direction
  3
• Length
  235.1 mm
• Conductor cross section flexible min.
  95 mm²
• Cable lug connection according to standard
  In accordance with customer specifications
• AWG min
  4/0
• Hole diameter, min.
  13.2 mm
• Permissible humidity (storage/transport)
  30 % ... 70 %
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141120
ETIM 4.0
EC000897
UNSPSC 11
39121410
UNSPSC 20.0
39121410
Nominal cross section
185 mm²
Degree of pollution
3
Test duration per axis
5 h
Relative insulation material temperature index (Elec., UL 746 B)
150 °C
Width
49 mm
Height NS 35/15
89.5 mm
Connection
1 level
Stripping length
The stripping length depends on the specification provided by the cable lug manufacturer.
Min. AWG conductor cross section, flexible
4/0
Bolt diameter
12 mm
Screw thread
M12
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.0
27141100
ECLASS 6.0
27141100
ETIM 6.0
EC000897
UNSPSC 19.0
39121410
Note
Connection bolts
Potentials
1
Insulating material
PA
Insulating material group
I
Nominal voltage UN
1800 V
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Note regarding shock protection
With closed cover
Result of power-frequency withstand voltage test
Test passed
Result of flexion and pull-out test
Test passed
Tensile test result
Test passed
Short circuit stability result
Test passed
Result of thermal test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
ASD level
6.12 (m/s2)2/Hz
Shock test result
Test passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Pitch
49 mm
Connection in acc. with standard
DIN EN 50124-1:2017-12
Max. cross section for cable lug connection
185 mm²
Bolt length
36 mm
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 5.1
27141100
ECLASS 7.0
27141120
ECLASS 9.0
27141120
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Number of connections
2
Overvoltage category
III
Open side panel
No
Back of the hand protection
guaranteed
Surge voltage test setpoint
9.8 kV
Bending test rotation speed
10 rpm
Result of tight fit on support
Test passed
Bending test conductor cross section/weight
185 mm² /16.8 kg
Proof of thermal characteristics (needle flame) effective duration
30 s
Oscillation, broadband noise test result
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 35/7,5
82 mm
Connection method
Bolt connection
Max. AWG conductor cross section, flexible
400
AWG max
400
Cable lug width, max.
39 mm
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 4.1
27141100
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
Area of application
Railway industry
Maximum load current
450 A
Finger protection
guaranteed
Power frequency withstand voltage setpoint
2.2 kV
Bending test turns
135
Requirements, voltage drop
U1 ≤ 3.2 mV; U2 ≤ 1.5 x U1
Conductor cross section short circuit testing
185 mm²
Short-time current
22.2 kA
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Shock form
Semi-sinusoidal
Shock duration
18 ms
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Conductor cross section flexible max.
185 mm²
Min. cross section for cable lug connection
95 mm²
Additional text
Customer-specific double-hole cable lug, 13.2 mm hole diameter, 30 mm hole spacing
Tightening torque max
44 Nm
Tightening torque, min
40 Nm
ECLASS 10.0.1
27141120
ETIM 7.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 12.01
39121410

Product condition