1103282 Phoenix Contact Electrical Wires & Cables

1103282 Product Details

• Application
  For charging electric vehicles (EV) with alternating current (AC)
• Type
  rear protective cover screw connection
• Standards/regulations
  IEC 62196-2
• Width
  75 mm
• Depth
  76.2 mm
• Degree of protection
  IP44 (plugged in)
• Rated current of power contacts
  32 A
• Rated voltage for signal contacts
  30 V AC
• Insertion force
  < 100 N
• Required installation depth
  < 5 mm (Rear panel mounting)
• Screws included in the scope of delivery
  none
• Number of positions of theconnectors
  3
• Reverse current of the motor
  max. 2.4 A (Stall current)
• Mechanical emergency release
  available
• ECLASS 10.0.1
  27144706
• Design
  Generation 1
• Height
  112.6 mm
• Cable structure
  3 x 0.5 mm²
• Ambient temperature (operation)
  -30 °C ... 50 °C
• Number of phases
  3
Rated current for signal contacts
2 A
Withdrawal force
< 100 N
Design line
Generation 1
Customer variations
On request
Operating voltage
12 V (Typical power supply at the motor)
Cable length
0.5 m
China RoHS
Environmentally Friendly Use Period = 10;
Note on the connection method
Crimp connection, cannot be disconnected
Conductor length
0.7 m (AC cables)
Ambient temperature (storage/transport)
-40 °C ... 80 °C
Maximum charging power
22 kW
Number of signal contacts
2 (CP, PP)
Possible mounting positions
Rear panel mounting
Screw connection of a protective cover
Only rear mounting possible
Required mounting screws
M5 thread
Material surface of contacts
Ag
Typical motor current for locking
250 mA Average run current
Service life insertion cycles
> 10000 load cycles
REACh SVHC
Lead 7439-92-1
ECLASS 9.0
27144706
Affixed logo
“PHOENIX CONTACT” logo
Charging standard
Type 2
Type of conductor
Single wires
Number of power contacts
5 (L1, L2, L3, N, PE)
Type of signal transmission
Pulse width modulation
Restrictions to mounting position
Only 0 to 90 degree frontal inclination possible, see figure
Max. wall thickness
max. 50 mm (Rear panel mounting, normative maximum specification for infrastructure plug)
Material
Plastic
Possible power supply range at the motor
9 V ... 15.5 V
Pause time after entry or exit path
8x (ton, typical)
Lock recognition
available
Charging mode
Mode 3, Case B
Bore dimensions
60 mm x 60 mm
Max. altitude
5000 m (above sea level)
Type of charging current
AC 3-phase
Rated voltage for power contacts
480 V AC
Insertion/withdrawal cycles
> 10000
Mounting position of the locking actuator
Top center
Mounting hole diameter
7.00 mm (ø)
Housing color
black
Locking type
Locking in the inserted state with a locking mechanism
Operating current
< 1.8 A
Recommended triggering time
200 ms ... 10 s (ton, typical)
Max. dwell time with reverse current
4 s
Lock setting
LOCK (Lever in horizontal position)
ECLASS 11.0
27144706

Product condition