1102626 Phoenix Contact Data & Networking Devices

1102626 Product Details

• Depth
  121 mm
• Degree of protection
  IP65
• Noise emission
  EN 61000-6-4, Class B, domain of use: residential and small commercial
• Power supply system
  TN
• Conductor cross section flexible max.
  1.5 mm²
• Interface 1
  Ethernet / Fast Ethernet / Gigabit Ethernet
• Transmission medium
  depending on the SFP module used
• Transmission speed
  10/100/1000 Mbps
• Load/output load current output
  no inductive load
• Time synchronization
  SNTP (Simple Network Time Protocol)
• Standards/regulations
  IEC 62444
• Width
  284 mm
• Altitude
  2000 m
• Tightening torque
  2 Nm M20
• Net weight
  4300 g
• Supply voltage range
  100 V AC ... 240 V AC -15 % ... +10 % (Single-phase)
• Max. AWG conductor cross section, flexible
  10
• Stripping length
  10 mm
• Note on the connection method
  The SFP modules are available as accessories
• Maximum output power
  165 W (>55°C derating)
Conductor cross section AWG min.
24
Filter functions
Port prioritization
IP parameterization
DHCP client
Test result
15g, 11 ms
Conducted noise emission
EN 61000-6-3 Class B, domain of use: residential and small commercial
Overvoltage category
III (With protective modules plugged in)
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Thread type, cable screw connection
5x M20, 5x M25
MTTF
450 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
Connection method
Push-in spring connection
Conductor cross section flexible, with ferrule without plastic sleeve
0.25 mm² ... 1.5 mm² (Stripping length 8 mm)
Min. AWG conductor cross section, flexible
24
No. of ports
1
Basic functions
Store-and-forward switch, complies with IEEE 802.3
Conductor cross section AWG max.
16
Output nominal voltage
24 V DC ±10 % (Supply for devices within the Smart Camera Box)
Redundancy
RSTP (Rapid Spanning Tree Protocol)
Type of test
Shock in acc. with EN 60068-2-27/IEC 60068-2-27
Contact discharge
± 6 kV
Rated insulation voltage
3 kV AC (Input / output, IEC/EN 60950-1)
ECLASS 9.0
27180590
Height
364 mm
Permissible humidity (operation)
10 % ... 95 % (non-condensing)
Other resistance
UV-resistant in accordance with UL746C Housing
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Material
Polycarbonate PC (Housing)
Protection
Miniature circuit breaker, 6 A ... 16 A, characteristics B, C, D, K
2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve
0.5 mm² ... 1.5 mm²
Conductor cross section flexible min.
0.2 mm²
Transmission length
< 80 km (depending on the SFP module used)
Interface 2
Ethernet / Fast Ethernet / Gigabit Ethernet
Interface 3
Configuration interface
Management
Web-based management (HTTP/HTTPS)
Diagnostic functions
RMON History
Designation
Corrosive gas test
Identification
ISA-S71.04-1985 G3 Harsh Group A
Frequency range
0.15 MHz ... 80 MHz (80% amplitude modulation with 1 kHz)
Comments
Criterion B
ECLASS 10.0.1
27142422
ECLASS 11.0
27142422
Ambient temperature (operation)
-40 °C ... 70 °C (>50°C derating)
Noise immunity
EN 61000-6-2
Protection class
I (Protective grounding of all conductive housing parts)
External cable diameter
6 mm ... 12 mm (M20)
Conductor cross section, flexible, with ferrule, with plastic sleeve
0.25 mm² ... 0.75 mm² (Stripping length 8 mm)
Conductor cross section solid max.
1.5 mm²
Conductor cross section solid min.
0.2 mm²
Interface
Configuration via web-based management
Interface 4
Switching output
Output current
300 mA (typical)
Additional functions
Jumbo frames
Indirect discharge
± 6 kV
REACh SVHC
Lead 7439-92-1
Pollution degree
2

Product condition