1088744 Phoenix Contact Terminal Blocks

Product Details

• Color
  black
• Rated surge voltage
  4 kV
• Maximum power dissipation
  max. 1.6 W (with single arrangement of the fuse terminal block in the event of overload)
• Nominal voltage UN
  60 V
• Width
  6.2 mm
• Ambient temperature (assembly)
  -5 °C ... 70 °C
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.2 mm²
• Connection method
  Push-in connection
• ECLASS 4.1
  27141100
• ECLASS 5.1
  27141100
• ETIM 7.0
  EC000899
• UNSPSC 13.2
  39121410
• UNSPSC 21.0
  39121410
• Number of levels
  1
• Area of application
  Railway industry
• LED current range
  0.4 mA ... 0.86 mA
• Fuse
  G / 5 x 20
• Height NS 35/7,5
  64.8 mm
• Ambient temperature (storage/transport)
  -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
• Conductor cross section solid max.
  6 mm²
Nominal cross section
4 mm²
Degree of pollution
3
LED voltage range
30 V AC/DC ... 60 V AC/DC
Maximum load current
6.3 A (with 6 mm² conductor cross section, rigid)
Fuse type
Glass / ceramics / ...
Open side panel
Yes
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (actuation)
-5 °C ... 70 °C
Conductor cross section flexible min.
0.2 mm²
Conductor cross section AWG max.
10
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm²
ECLASS 4.0
27141100
ECLASS 9.0
27141116
UNSPSC 6.01
30211811
UNSPSC 20.0
39121410
Number of connections
2
Flammability rating according to UL 94
V0
Maximum power dissipation for nominal condition
1.6 W
Insulating material group
I
Nominal current IN
6.3 A
End cover width
2.2 mm
Height
57.3 mm
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
ECLASS 10.0.1
27141116
ECLASS 5.0
27141100
ETIM 6.0
EC000899
UNSPSC 11
39121410
UNSPSC 12.01
39121410
Note
The current is determined by the fuse used, the voltage by the selected LED.If the fuse is faulty, the downstream circuit will not be disconnected.
Insulating material
PA
Overvoltage category
III
Connection in acc. with standard
IEC 60947-7-3
Length
63.4 mm
Height NS 35/15
72.3 mm
Conductor cross section AWG min.
24
Conductor cross section flexible max.
6 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.2 mm²
Stripping length
9 mm ... 11 mm
ECLASS 11.0
27141116
ECLASS 7.0
27141116
ETIM 3.0
EC000899
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Internal cylindrical gage
A4
ECLASS 6.0
27141100
ETIM 2.0
EC000897
ETIM 4.0
EC000899
UNSPSC 18.0
39121410