1088734 Phoenix Contact Terminal Blocks

Product Details

• Conductor cross section flexible min.
  0.2 mm²
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
  0.5 mm²
• Ambient temperature (assembly)
  -5 °C ... 70 °C
• ECLASS 4.0
  27141100
• ECLASS 6.0
  27141100
• ETIM 6.0
  EC000897
• UNSPSC 11
  39121410
• UNSPSC 19.0
  39121410
• UNSPSC 21.0
  39121410
• Nominal cross section
  4 mm²
• Insulating material
  PA
• Insulating material group
  I
• Nominal current IN
  32 A
• Back of the hand protection
  guaranteed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Bending test conductor cross section/weight
  0.2 mm² / 0.2 kg
• Result of tight fit on support
  Test passed
• Conductor cross section short circuit testing
  4 mm²
• Result of thermal test
  Test passed
• Result of aging test
  Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Acceleration
30g
Shock test result
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Potentials
1
Area of application
Railway industry
Degree of pollution
3
Maximum power dissipation for nominal condition
1.02 W
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Finger protection
guaranteed
Bending test rotation speed
10 rpm
Bending test turns
135
Result of voltage-drop test
Test passed
Short circuit stability result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
ASD level
6.12 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Number of shocks per direction
3
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height
45.7 mm
Connection method
Push-in connection
Conductor cross section solid max.
6 mm²
Conductor cross section AWG max.
10
Max. AWG conductor cross section, flexible
10
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27141120
ECLASS 9.0
27141120
ETIM 7.0
EC000897
UNSPSC 7.0901
39121410
Number of connections
4
Color
gray
Overvoltage category
III
Open side panel
Yes
Surge voltage test setpoint
9.8 kV
Result of flexion and pull-out test
Test passed
Conductor cross section tensile test
6 mm²
Tractive force setpoint
80 N
Short-time current
0.48 kA
Ageing test for screwless modular terminal block temperature cycles
192
Test spectrum
Service life test category 2, bogie-mounted
Shock form
Half-sine
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
End cover width
2.2 mm
Length
69.2 mm
Conductor cross section AWG min.
24
Min. AWG conductor cross section, flexible
24
Conductor cross section flexible, with ferrule with plastic sleeve min.
1.5 mm²
UNSPSC 12.01
39121410
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 5.0
27141100
ETIM 2.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
Number of levels
1
Flammability rating according to UL 94
V0
Rated surge voltage
8 kV
Maximum load current
38 A (with 6 mm² conductor cross section, rigid)
Nominal voltage UN
1000 V
Result of surge voltage test
Test passed
Result of power-frequency withstand voltage test
Test passed
Power frequency withstand voltage setpoint
2.2 kV
Tensile test result
Test passed
Result of temperature-rise test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Oscillation, broadband noise test result
Test passed
Test duration per axis
5 h
Shock duration
18 ms
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Stripping length
9 mm ... 11 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section solid min.
0.75 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Connection cross sections directly pluggable
0.75 mm² 6 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ETIM 3.0
EC000897
UNSPSC 18.0
39121410
Width
6.2 mm
Height NS 35/7,5
47.2 mm
Height NS 35/15
54.7 mm
Connection
1 level
Conductor cross section flexible max.
6 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
1.5 mm²
Internal cylindrical gage
A4
ECLASS 10.0.1
27141120
ECLASS 5.1
27141100
ECLASS 7.0
27141120
ETIM 4.0
EC000897
UNSPSC 20.0
39121410