1088730 Phoenix Contact Terminal Blocks

1088730 Product Details

• Number of levels
  1
• Flammability rating according to UL 94
  V0
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Color
  green-yellow
• Degree of pollution
  3
• Overvoltage category
  III
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2018-05
• Test spectrum
  Service life test category 2, bogie-mounted
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• End cover width
  2.2 mm
• Stripping length
  9 mm ... 11 mm
• Potentials
  1
• Rated surge voltage
  8 kV
• Finger protection
  guaranteed
• ASD level
  6.12 (m/s2)2/Hz
• Static insulating material application in cold
  -60 °C
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 35/15
44.3 mm
Conductor cross section solid min.
0.75 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
1.5 mm²
Internal cylindrical gage
A4
ECLASS 10.0.1
27141141
ECLASS 6.0
27141100
UNSPSC 6.01
30211811
UNSPSC 20.0
39121410
Nominal cross section
4 mm²
Area of application
Railway industry
Insulating material group
I
Back of the hand protection
guaranteed
Test duration per axis
5 h
Number of shocks per direction
3
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Length
50.8 mm
Connection method
Push-in connection
Conductor cross section solid max.
6 mm²
Conductor cross section AWG max.
10
Conductor cross section flexible, with ferrule without plastic sleeve min.
1.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.0
27141100
ETIM 3.0
EC000897
ETIM 7.0
EC000897
UNSPSC 18.0
39121410
Number of connections
2
Insulating material
PA
Open side panel
Yes
Oscillation, broadband noise test result
Test passed
Acceleration
30g
Shock form
Half-sine
Shock duration
18 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Width
6.2 mm
Connection
1 level
Conductor cross section flexible min.
0.2 mm²
Min. AWG conductor cross section, flexible
24
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141120
ECLASS 5.1
27141100
ECLASS 9.0
27141141
ETIM 6.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
Shock test result
Test passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height
35.3 mm
Height NS 35/7,5
36.8 mm
Connection in acc. with standard
IEC 60947-7-2
Max. AWG conductor cross section, flexible
10
Connection cross sections directly pluggable
0.75 mm² 6 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.1
27141100
ETIM 2.0
EC000897
UNSPSC 7.0901
39121410
Conductor cross section AWG min.
24
Conductor cross section flexible max.
6 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 7.0
27141120
ETIM 4.0
EC000897
UNSPSC 11
39121410
UNSPSC 13.2
39121410
UNSPSC 19.0
39121410

Product condition