1088498 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  1
• Color
  black
• Degree of pollution
  3
• Connection in acc. with standard
  IEC 60947-7-3
• Fuse type
  Flat
• Result of surge voltage test
  Test passed
• Contact resistance
  Test passed
• Bending test conductor cross section/weight
  0.5 mm² / 0.3 kg
• Result of aging test
  Test passed
• Oscillation, broadband noise test result
  Test passed
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
  4 mm��
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
  0.5 mm²
• Internal cylindrical gage
  A5
• ECLASS 5.0
  27141116
• ECLASS 6.0
  27141100
• ECLASS 9.0
  27141116
• UNSPSC 11
  39121410
• UNSPSC 19.0
  39121410
• Number of connections
  2
Rated surge voltage
6 kV
Insulating material group
I
Maximum load current
30 A
Nominal voltage UN
400 V
Back of the hand protection
guaranteed
Compatibitity between modular fuse terminal block and fuse insert
Test passed
Result of flexion and pull-out test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
ASD level
6.12 (m/s2)2/Hz
Shock test result
Test passed
Shock form
Half-sine
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
88.9 mm
Width
10.2 mm
Ambient temperature (assembly)
-5 °C ... 70 °C
Ambient temperature (actuation)
-5 °C ... 70 °C
Conductor cross section solid min.
0.5 mm²
Conductor cross section flexible max.
10 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
ECLASS 11.0
27141116
ECLASS 5.1
27141100
ETIM 2.0
EC000897
ETIM 4.0
EC000899
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
Nominal cross section
10 mm²
Insulating material
PA
Rated operating voltage
58 V
Fuse
C
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Finger protection
guaranteed
Result of tight fit on support
Test passed
Bending test rotation speed
10 rpm
Result of temperature-rise test
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Acceleration
5g
Shock duration
30 ms
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/7,5
50.5 mm
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Conductor cross section flexible min.
0.5 mm²
Conductor cross section AWG max.
6
Conductor cross section AWG min.
20
Conductor cross section flexible, with ferrule with plastic sleeve max.
10 mm²
ECLASS 10.0.1
27141116
ECLASS 4.1
27141116
ECLASS 7.0
27141116
ETIM 6.0
EC000899
UNSPSC 7.0901
39121410
UNSPSC 21.0
39121410
Flammability rating according to UL 94
V0
Overvoltage category
III
Nominal current IN
30 A
Open side panel
No
Result of power-frequency withstand voltage test
Test passed
Actuatiing forces on plug in or lever in fuse insert carriers
Test passed
Testing the rated value of the power dissipation (exclusively short circuit protection)
Test passed
Bending test turns
135
Test spectrum
Service life test category 2, bogie-mounted
Test duration per axis
5 h
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Number of shocks per direction
3
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Height
49.5 mm
Height NS 35/15
58 mm
Permissible humidity (storage/transport)
30 % ... 70 %
Conductor cross section solid max.
16 mm²
Note
The current is determined by the fuse used, the voltage by the light indicator.
Conductor cross section flexible, with ferrule without plastic sleeve max.
10 mm²
Stripping length
18 mm
Connection method
Push-in connection
ECLASS 4.0
27141116
ETIM 3.0
EC000899
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
UNSPSC 20.0
39121410