1086946 Phoenix Contact Electrical Safety Devices

1086946 Product Details

• Width
  12.5 mm
• Max. permissible humidity (storage/transport)
  75 % (on average, 85% infrequently, non-condensing)
• Input current range "0" signal
  0 mA ... 2 mA
• Number of outputs
  2
• Switching voltage
  min. 5 V DC
• Output fuse
  150 mA Fast-blow
• Nominal operating mode
  100% operating factor
• Mounting position
  vertical or horizontal
• Min. degree of protection of inst. location
  IP54
• Connection method
  Push-in connection
• Conductor cross-section AWG
  24 ... 16
• Conductor cross-section flexible with ferrule and plastic sleeve
  0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
• Height
  116.6 mm
• Maximum altitude
  ≤ 2000 m (Above sea level)
• Rated control circuit supply voltage US
  24 V DC -20 % / +25 %
• Power consumption at US
  typ. 360 mW (per channel (configurable))
• Contact type
  2 confirmation current paths
• Mechanical service life
  10x 106 cycles
• Switching frequency
  1 Hz
• Recovery time
  500 ms
Degree of protection
IP20
Status display
2 x green LEDs
Conductor cross section flexible
0.2 mm² ... 1.5 mm²
Stripping length
8 mm
Safety Integrity Level (SIL)
3 (Reference IEC 61508)
Rated insulation voltage
250 V AC
ATEX
 II 3 G  Ex ec nC IIC T4 Gc
Environmental simulation test
ISA-S71.04 (G3)
UL, USA/Canada
cULus
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Input voltage range "0" signal
0 V DC ... 5 V DC
Protective circuit
Serial protection against polarity reversal 38.6 V suppressor diode
Contact material
AgCuNi, + Au
Switching capacity according to IEC 60947-5-1
4 A (24 V (DC13))
Typical pickup time at US
< 70 ms (when controlled via A1 or A3 at US)
Net weight
114.755 g
Assembly instructions
See derating curve
Housing material
PBT
Conductor cross section solid
0.2 mm² ... 1.5 mm²
Conductor cross-section flexible with ferrule without plastic sleeve
0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Stop category
0
Performance level (PL)
e
Standards/regulations
EN 61010-1, EN 60947-1, EN 60079-7, EN 60079-15
Overvoltage category
III
Conformance
CE-compliant
ECLASS 11.0
27371819
Depth
114.5 mm
Max. permissible relative humidity (operation)
75 % (on average, 85% infrequently, non-condensing)
Designation
Air clearances and creepage distances between the power circuits
Filter time
2 ms (in the event of voltage dips at Us)
Output description
2 N/C contacts parallel, without delay, safety-related, floating
Output name
Confirmation current paths
Sq. Total current
72 A2 (High-demand, observe derating)
Typical release time at US
< 30 ms (when controlled via A1 or A3 at US)
Category
4
Rated surge voltage/insulation
Safe isolation, reinforced insulation 6.4 kV from (A1/A2, A3/A4, 21/22, 41/42) to (13/14, 33/34) and between (13/14) and (33/34)
IECEx
Ex ec nC IIC T4 Gc
China RoHS
Environmentally Friendly Use Period = 50 years
Ambient temperature (operation)
-40 °C ... 70 °C (observe derating)
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Rated control supply current IS
typ. 15 mA (per channel (configurable))
Inrush current
min. 1 mA
Limiting continuous current
100 mA
Switching capacity
min. 20 mW
Relay type
Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Mounting type
DIN rail mounting
Housing color
yellow
Vibration (operation)
10 Hz ... 150 Hz, 2g
Shock
15g
ECLASS 10.0.1
27371819
Safety Integrity Level Claim Limit (SIL CL)
3
Degree of pollution
2
REACh SVHC
Lead 7439-92-1
ECLASS 9.0
27371819

Product condition