1085611 Phoenix Contact Electrical Wires & Cables

1085611 Product Details

• Design line
  Standard
• Application
  For charging electric vehicles (EV) with direct current (DC)
• Height
  137.8 mm (Vehicle charging connector)
• Stripping length
  150 mm ±20 mm
• Maximum charging power
  180 kW
• Number of power contacts
  3 (PE, DC+, DC-)
• Note on the connection method
  Crimp connection, cannot be disconnected
• Charging standard
  GB/T
• Conductor length
  5 m
• Max. altitude
  5000 m (above sea level)
• Type of signal transmission
  according to GB/T 27930-2015
• Insertion/withdrawal cycles
  > 10000
• Mating face color
  black
• Actuating element color
  black
• Actuating lever material
  Metal
• Cable structure
  2 × 50 mm² + 1 × 25 mm² + 2 × 4 mm² + (2 × 0.75 mm²) P + 10 × 0.75 mm²
• Type of conductor
  straight
• Minimum bending radius
  165.5 mm (5 x diameter)
• Temperature range
  -50 °C ... 130 °C
• Temperature coefficient (TCR)
  3850 ppm/K
ECLASS 9.0
27144705
Affixed logo
“PHOENIX CONTACT” logo
Standards/regulations
DIN EN 60751
Width
77 mm (Vehicle charging connector)
Rated current of power contacts
180 A
Rated current for signal contacts
20 A ((A+, A-))
Resistor coding
1000 Ω (between PE and CC1 / PE and CC2)
Withdrawal force
< 100 N
Label
14.1 mm x 44.8 mm (customer logo on request)
Material mating face
Plastic
Wiring certifications
CQC1105-2015
External sheath, color
black
Current supply duration
50 ms ... 100 ms (NOTE: Continuous current supply > 100 ms damages the locking actuator)
Tolerance at the sensor with the recommended measured current
±1K
ECLASS 10.0.1
27144705
Type
DC charging cable
Charging mode
Mode 4
Ambient temperature (storage/transport)
-40 °C ... 80 °C
Degree of protection
IP55 (plugged in; when plugged in and ready to operate, the degree of protection is only ensued if both plug-in components are original products from Phoenix Contact or suitable standard-compliant products)
Number of signal contacts
6 (S+, S-, A+, A-, CC1, CC2)
Rated voltage for signal contacts
30 V
Insertion force
< 100 N
Color protective cap
black
Material protective cap
Plastic
Flammability rating
V0
Cable resistance
≤ 0.000386 Ω/m (based on a power core, at an ambient temperature of 20°C)
Outer sheath, material
TPU
Recommended measured current
1 mA (1 V at 0°C)
Shutdown temperature
90 °C equivalent to a Pt 1000 value of 1346.5 Ω
ECLASS 11.0
27144705
Design
Generation 2
Depth
279.4 mm (Vehicle charging connector)
Ambient temperature (operation)
-30 °C ... 50 °C
Rated voltage for power contacts
1000 V DC
Temperature monitoring
2x Pt 1000
Housing color
black
Housing material
Plastic
Material handle area
Soft plastic
Material surface of contacts
Ag
External cable diameter
33.1 mm ±0.4 mm
Locking type
Locking option for actuating lever with actuators integrated in the Vehicle Connector
Type of sensor
Pt 1000
Long-term stability (max. R0-Drift)
0.06 % (After 1000 hours at 130°C)
ETIM 6.0
EC002897
Color handle area
gray
Customer variations
On request
Wiring standards/regulations
GB/T 33594-2017
Wiring class
Class 5/6
Locking current
2 A
Locking detection
Maximum of 24 V / 14 mA via signal lines Lock Detection+ (WHOG) and Lock Detection- (WHBN)
China RoHS
Environmentally Friendly Use Period = 10;
ETIM 7.0
EC002897

Product condition