1079070 Phoenix Contact Terminal Blocks

Product Details

• Nominal cross section
  2.5 mm²
• Overvoltage category
  III
• Nominal voltage UN
  400 V
• Power frequency withstand voltage setpoint
  1.89 kV
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Short circuit stability result
  Test passed
• Short-time current
  0.3 kA
• Color
  gray
• Degree of pollution
  3
• Nominal current IN
  20 A
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Result of surge voltage test
  Test passed
• Bending test turns
  135
• Ageing test for screwless modular terminal block temperature cycles
  192
• Acceleration
  30g
• Shock duration
  18 ms
• Static insulating material application in cold
  -60 °C
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• Height
  45.7 mm
Conductor cross section flexible min.
0.14 mm²
Conductor cross section AWG min.
26
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (assembly)
-5 °C ... 70 °C
Number of connections
4
Rated surge voltage
6 kV
Open side panel
Yes
Result of power-frequency withstand voltage test
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Result of temperature-rise test
Test passed
Result of aging test
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section solid min.
0.14 mm²
Conductor cross section flexible max.
4 mm²
Connection method
Push-in connection
Ambient temperature (actuation)
-5 °C ... 70 °C
Flammability rating according to UL 94
V0
Insulating material group
I
Finger protection
guaranteed
Result of flexion and pull-out test
Test passed
Result of tight fit on support
Test passed
Conductor cross section short circuit testing
2.5 mm²
Result of thermal test
Test passed
Oscillation, broadband noise test result
Test passed
Shock test result
Test passed
Number of shocks per direction
3
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Length
80.5 mm
Height NS 35/7,5
47.2 mm
Conductor cross section AWG max.
12
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
ECLASS 9.0
27141126
Number of levels
1
Insulating material
PA
Connection in acc. with standard
IEC 60947-7-1
Maximum load current
20 A (with 4 mm² conductor cross section, rigid)
Back of the hand protection
guaranteed
Bending test rotation speed
10 rpm
Tight fit on carrier
NS 35
Test spectrum
Service life test category 2, bogie-mounted
ASD level
6.12 (m/s2)2/Hz
Shock form
Half-sine
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
5.2 mm
Conductor cross section solid max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141126
Proof of thermal characteristics (needle flame) effective duration
30 s
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test duration per axis
5 h
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
End cover width
2.2 mm
Height NS 35/15
54.7 mm
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Stripping length
8 mm ... 10 mm
Internal cylindrical gage
A3
ECLASS 11.0
27141126