1077085 Phoenix Contact Terminal Blocks

Product Details

• Potentials
  1
• Overvoltage category
  III
• Maximum load current
  52 A (with 10 mm² conductor cross section, rigid)
• Finger protection
  guaranteed
• Result of flexion and pull-out test
  Test passed
• Bending test conductor cross section/weight
  0.5 mm² / 0.3 kg
• Result of voltage-drop test
  Test passed
• Short-time current
  0.72 kA
• Result of aging test
  Test passed
• Ageing test for screwless modular terminal block temperature cycles
  192
• Number of levels
  1
• Nominal cross section
  6 mm²
• Flammability rating according to UL 94
  V0
• Nominal current IN
  41 A
• Back of the hand protection
  guaranteed
• Result of power-frequency withstand voltage test
  Test passed
• Result of tight fit on support
  Test passed
• Shock form
  Half-sine
• Number of connections
  2
• Rated surge voltage
  8 kV
Nominal voltage UN
1000 V
Result of surge voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test rotation speed
10 rpm
Tractive force setpoint
90 N
Result of temperature-rise test
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Acceleration
30g
ASD level
6.12 (m/s2)2/Hz
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Length
57.7 mm
Conductor cross section solid min.
1 mm²
Max. AWG conductor cross section, flexible
10
Conductor cross section flexible, with ferrule without plastic sleeve min.
1 mm²
Connection cross sections directly pluggable
1 mm² 10 mm²
ECLASS 10.0.1
27141120
ECLASS 5.0
27141120
ECLASS 7.0
27141120
ETIM 4.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 18.0
39121410
Color
black/yellow
Insulating material
PA
Insulating material group
I
Degree of pollution
3
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Surge voltage test setpoint
9.8 kV
Bending test turns
135
Tensile test result
Test passed
Setpoint
5 N
Short circuit stability result
Test passed
Result of thermal test
Test passed
Test duration per axis
5 h
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock duration
18 ms
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height
42.2 mm
Height NS 35/15
51 mm
Conductor cross section AWG min.
20
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm² When using TWIN ferrules, we recommend a minimum ferrule length of 13 mm.
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.0
27141121
ETIM 6.0
EC000897
ETIM 3.0
EC000897
UNSPSC 11
39121410
Area of application
Railway industry
Maximum power dissipation for nominal condition
1.31 W
Open side panel
Yes
Power frequency withstand voltage setpoint
2.2 kV
Conductor cross section tensile test
10 mm²
Tight fit on carrier
NS 35
Requirements, voltage drop
U1 ≤ 3.2 mV; U2 ≤ 1.5 x U1
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Oscillation, broadband noise test result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Shock test result
Test passed
Number of shocks per direction
3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
End cover width
2.2 mm
Connection
1 level
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible min.
0.5 mm²
Conductor cross section flexible max.
10 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.1
27141100
ECLASS 9.0
27141120
ETIM 7.0
EC000897
UNSPSC 20.0
39121410
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Conductor cross section short circuit testing
6 mm²
Proof of thermal characteristics (needle flame) effective duration
30 s
Test spectrum
Service life test category 2, bogie-mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
8.2 mm
Height NS 35/7,5
43.5 mm
Stripping length
10 mm ... 12 mm
Conductor cross section AWG max.
8
Conductor cross section flexible, with ferrule with plastic sleeve min.
1 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 11.0
27141120
ETIM 2.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 12.01
39121410
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Connection method
Push-in connection
Conductor cross section solid max.
10 mm²
Min. AWG conductor cross section, flexible
20
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Internal cylindrical gage
A5
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141121
ECLASS 6.0
27141100
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410
UNSPSC 21.0
39121410