1076793 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  1
• Flammability rating according to UL 94
  V0
• Overvoltage category
  III
• Nominal current IN
  20 A
• Bending test rotation speed
  10 rpm
• Tensile test result
  Test passed
• Tight fit on carrier
  NS 35/NS 32
• Result of thermal test
  Test passed
• Test spectrum
  Service life test category 2, bogie-mounted
• Shock test result
  Test passed
• Number of shocks per direction
  3
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Width
  10.2 mm
• Height NS 35/15
  58 mm
• Connection in acc. with standard
  IEC 60947-7-1
• Conductor cross section AWG max.
  4
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  16 mm²
• Conductor cross section flexible, with ferrule with plastic sleeve max.
  16 mm²
• Color
  gray
Maximum load current
20 A
Back of the hand protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Bending test turns
135
Result of temperature-rise test
Test passed
Short circuit stability result
Test passed
Oscillation, broadband noise test result
Test passed
ASD level
6.12 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height
49.5 mm
Connection method
Push-in connection
Conductor cross section solid max.
16 mm²
Conductor cross section AWG min.
24
Conductor cross section flexible, with ferrule with plastic sleeve min.
1 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Internal cylindrical gage
A6
Ambient temperature (assembly)
-5 °C ... 70 °C
ETIM 6.0
EC000902
ECLASS 7.0
27141126
Nominal cross section
10 mm²
Rated surge voltage
6 kV
Open side panel
No
Finger protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of tight fit on support
Test passed
Conductor cross section short circuit testing
2.5 mm²
Result of aging test
Test passed
Test duration per axis
5 h
Shock form
Half-sine
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/7,5
50.5 mm
Conductor cross section solid min.
1 mm²
Conductor cross section flexible max.
16 mm²
Max. AWG conductor cross section, flexible
4
ECLASS 11.0
27141126
Number of connections
2
Degree of pollution
3
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Power frequency withstand voltage setpoint
1.89 kV
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Short-time current
0.3 kA
Proof of thermal characteristics (needle flame) effective duration
30 s
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock duration
18 ms
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
End cover width
2.2 mm
Connection
1 level
Min. AWG conductor cross section, flexible
20
Insulating material
PA
Insulating material group
I
Nominal voltage UN
500 V
Result of surge voltage test
Test passed
Result of flexion and pull-out test
Test passed
Setpoint
5 N
Result of voltage-drop test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Acceleration
30g
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2018-05
Surface flammability NFPA 130 (ASTM E 162)
passed
Static insulating material application in cold
-60 °C
Length
88.9 mm
Stripping length
18 mm
Conductor cross section flexible min.
0.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
1 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
1.5 mm²
ECLASS 10.0.1
27141126
ECLASS 5.0
27141100
ETIM 7.0
EC000902
ECLASS 9.0
27141126
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Connection cross sections directly pluggable
1 mm² 16 mm²
ECLASS 6.0
27141100
Ambient temperature (actuation)
-5 °C ... 70 °C
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 5.1
27141100