1075240 Phoenix Contact AC/DC Power Supplies

1075240 Product Details

• Height
  130 mm
• Max. permissible relative humidity (operation)
  ≤ 95 % (at 25 °C, non-condensing)
• Current consumption
  typ. 0.35 A (600 V DC)
• Setting range of the output voltage (USet)
  24 V DC ... 28 V DC (> 24 V DC, constant capacity restricted)
• Maximum power dissipation in no-load condition
  < 9 W
• Mounting position
  horizontal DIN rail NS 35, EN 60715
• Conductor cross section AWG min.
  24
• Electromagnetic compatibility
  Conformance with EMC Directive 2014/30/EU
• Contact discharge
  4 kV (Test Level 2)
• Comments
  Criterion A
• Surge voltage load (surge)
  EN 61000-4-5
• Voltage dips
  EN 61000-4-11
• Depth
  160 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Installation height
  ≤ 4000 m (> 2000 m, Derating: 10 %/1000 m)
• Recommended breaker for input protection
  2 A (gPV)
• Connection in series
  No
• Residual ripple
  < 40 mVPP (Ripple)
• Output power
  192 W
• Assembly instructions
  alignable: horizontally 0 mm (≤ 40 °C) 10 mm (≤ 70 °C), vertically 50 mm
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible max.
1.5 mm²
Standard – Safety extra-low voltage
IEC 62109-1:2011 (SELV)
Conducted noise emission
EN 55016
Frequency range
0.15 MHz ... 80 MHz
Output
1 kV (Test Level 3 - symmetrical)
Criterion A
Normal operating behavior within the specified limits.
Width
88.5 mm
Ambient temperature (start-up type tested)
-40 °C
Nominal input voltage range
600 V DC ... 1500 V DC
Nominal output current (IN)
8 A
Feedback voltage resistance
≤ 35 V DC
Net weight
1.5 kg
Connection method
Push-in connection
Standard - Electrical safety
EN 62109-1:2011
Noise emission
EN 55016
Discharge in air
8 kV (Test Level 3)
Signal
1 kV (Test Level 3 - symmetrical)
Conducted interference
EN 61000-4-6
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
Degree of protection
IP20
Inflammability class in acc. with UL 94 (housing / terminal blocks)
V0
Degree of pollution
2
Input voltage range
600 V DC ... 1500 V DC -15 % ... +10 %
Connection in parallel
Yes, for redundancy and increased capacity
Protection against overvoltage at the output (OVP)
≤ 30 V DC
Control deviation
< 1 % (change in load, static 10 % ... 90 %)
Efficiency
typ. 91.5 % (600 V DC)
MTBF (IEC 61709, SN 29500)
> 1500000 h (25 °C)
Conductor cross section solid min.
0.2 mm²
Conductor cross section solid max.
1.5 mm²
Standard - Safe isolation
DIN VDE 0100-410
UL approvals
UL 62109-1:2014
Electromagnetic HF field
EN 61000-4-3
Test field strength
10 V/m (Test Level 3)
Voltage
10 V (Test Level 3)
ECLASS 10.0.1
27210901
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Ambient temperature (operation)
-25 °C ... 70 °C (>60°C derating: 1.2%/K)
Climatic class
3K3 (in acc. with EN 60721)
Dielectric strength maximum
≤ 1800 V DC 1 s
Nominal output voltage
24 V DC ±1 %
Derating
> 60 °C ... 70 °C (2.5%/K)
Power loss nominal load max.
< 24 W
Insulation voltage input/output
4.2 kV DC (type test)
Protection class
I
Conductor cross section AWG max.
16
Stripping length
8 mm
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Electrostatic discharge
EN 61000-4-2
Input
3 kV (Test intensity >4 - symmetrical)
Fast transients (burst)
EN 61000-4-4
REACh SVHC
Lead 7439-92-1
ECLASS 9.0
27210901
ECLASS 11.0
27210901

Product condition