1073670 Phoenix Contact Electrical Wires & Cables

1073670 Product Details

• Design
  Generation 2
• Charging mode
  Mode 4
• Conductor length
  7 m
• Max. altitude
  5000 m (above sea level)
• Rated voltage for signal contacts
  30 V
• Insertion/withdrawal cycles
  > 10000
• Label
  14.1 mm x 44.8 mm (customer logo on request)
• Actuating lever material
  Metal
• Cable structure
  2 x 35 mm² + 1 x 25 mm² + 2 × 4 mm² + (2 × 0.75 mm²) P + 10 x 0.75 mm²
• Wiring certifications
  CQC1105-2015
• External sheath, color
  black
• Current supply duration
  50 ms ... 100 ms (NOTE: Continuous current supply > 100 ms damages the locking actuator)
• Temperature coefficient (TCR)
  3850 ppm/K
• ECLASS 10.0.1
  27144705
• Type
  DC charging cable
• Standards/regulations
  DIN EN 60751
• Height
  137.8 mm (Vehicle charging connector)
• Ambient temperature (operation)
  -30 °C ... 50 °C
• Number of power contacts
  3 (PE, DC+, DC-)
• Type of signal transmission
  according to GB/T 27930-2015
Temperature monitoring
2x Pt 1000
Design line
Standard
Color handle area
gray
Housing material
Plastic
Flammability rating
V0
Affixed logo
“PHOENIX CONTACT” logo
Normative cable length restrictions
NOTE: Cable management may be required.
Depth
279.4 mm (Vehicle charging connector)
Degree of protection
IP55 (plugged in; when plugged in and ready to operate, the degree of protection is only ensued if both plug-in components are original products from Phoenix Contact or suitable standard-compliant products)
Rated voltage for power contacts
1000 V DC
Resistor coding
1000 Ω (between PE and CC1 / PE and CC2)
Insertion force
< 100 N
Mating face color
black
Customer variations
On request
Material protective cap
Plastic
Outer sheath, material
TPU
Locking type
Locking option for actuating lever with actuators integrated in the Vehicle Connector
Recommended measured current
1 mA (1 V at 0°C)
Shutdown temperature
90 °C equivalent to a Pt 1000 value of 1346.5 Ω
ETIM 6.0
EC002897
Application
For charging electric vehicles (EV) with direct current (DC)
Width
77 mm (Vehicle charging connector)
Ambient temperature (storage/transport)
-40 °C ... 80 °C
Maximum charging power
125 kW
Rated current for signal contacts
20 A ((A+, A-))
Note on the connection method
Crimp connection, cannot be disconnected
Withdrawal force
< 100 N
Color protective cap
black
Material mating face
Plastic
Wiring class
Class 5/6
Cable resistance
≤ 0.000554 Ω/m (based on a power core, at an ambient temperature of 20°C)
Minimum bending radius
158 mm (5 x diameter)
Type of sensor
Pt 1000
Long-term stability (max. R0-Drift)
0.06 % (After 1000 hours at 130°C)
ECLASS 9.0
27144705
Charging standard
GB/T
Stripping length
150 mm ±20 mm
Rated current of power contacts
125 A
Number of signal contacts
6 (S+, S-, A+, A-, CC1, CC2)
Housing color
black
Actuating element color
black
Material handle area
Soft plastic
Material surface of contacts
Ag
External cable diameter
31.6 mm ±0.4 mm
Type of conductor
straight
Locking detection
Maximum of 24 V / 14 mA via signal lines Lock Detection+ (WHOG) and Lock Detection- (WHBN)
Temperature range
-50 °C ... 130 °C
ECLASS 11.0
27144705
Wiring standards/regulations
GB/T 33594-2017
Locking current
2 A
Tolerance at the sensor with the recommended measured current
±1K
China RoHS
Environmentally Friendly Use Period = 10;
ETIM 7.0
EC002897

Product condition