1073669 Phoenix Contact Electrical Wires & Cables

Product Details

• Application
  For charging electric vehicles (EV) with direct current (DC)
• Charging mode
  Mode 4
• Stripping length
  150 mm ±20 mm
• Number of power contacts
  3 (PE, DC+, DC-)
• Rated current for signal contacts
  20 A ((A+, A-))
• Mating face color
  black
• Color protective cap
  black
• Material handle area
  Soft plastic
• Flammability rating
  V0
• External cable diameter
  31.6 mm ±0.4 mm
• Minimum bending radius
  158 mm (5 x diameter)
• Current supply duration
  50 ms ... 100 ms (NOTE: Continuous current supply > 100 ms damages the locking actuator)
• Tolerance at the sensor with the recommended measured current
  ±1K
• Temperature range
  -50 °C ... 130 °C
• China RoHS
  Environmentally Friendly Use Period = 10;
• Type
  DC charging cable
• Charging standard
  GB/T
• Width
  77 mm (Vehicle charging connector)
• Depth
  279.4 mm (Vehicle charging connector)
• Rated current of power contacts
  125 A
Rated voltage for signal contacts
30 V
Temperature monitoring
2x Pt 1000
Actuating element color
black
Color handle area
gray
Material protective cap
Plastic
Material surface of contacts
Ag
Outer sheath, material
TPU
Type of sensor
Pt 1000
Temperature coefficient (TCR)
3850 ppm/K
Affixed logo
“PHOENIX CONTACT” logo
Normative cable length restrictions
NOTE: Cable management may be required.
Ambient temperature (storage/transport)
-40 °C ... 80 °C
Max. altitude
5000 m (above sea level)
Rated voltage for power contacts
1000 V DC
Resistor coding
1000 Ω (between PE and CC1 / PE and CC2)
Design line
Standard
Customer variations
On request
Actuating lever material
Metal
Wiring standards/regulations
GB/T 33594-2017
Cable resistance
≤ 0.000554 Ω/m (based on a power core, at an ambient temperature of 20°C)
Locking current
2 A
Shutdown temperature
90 °C equivalent to a Pt 1000 value of 1346.5 Ω
ECLASS 11.0
27144705
ETIM 7.0
EC002897
Design
Generation 2
Conductor length
6 m
Degree of protection
IP55 (plugged in; when plugged in and ready to operate, the degree of protection is only ensued if both plug-in components are original products from Phoenix Contact or suitable standard-compliant products)
Number of signal contacts
6 (S+, S-, A+, A-, CC1, CC2)
Note on the connection method
Crimp connection, cannot be disconnected
Insertion force
< 100 N
Withdrawal force
< 100 N
Housing material
Plastic
Material mating face
Plastic
Wiring certifications
CQC1105-2015
Locking type
Locking option for actuating lever with actuators integrated in the Vehicle Connector
Recommended measured current
1 mA (1 V at 0°C)
ECLASS 10.0.1
27144705
ETIM 6.0
EC002897
Standards/regulations
DIN EN 60751
Height
137.8 mm (Vehicle charging connector)
Ambient temperature (operation)
-30 °C ... 50 °C
Maximum charging power
125 kW
Type of signal transmission
according to GB/T 27930-2015
Insertion/withdrawal cycles
> 10000
Housing color
black
Label
14.1 mm x 44.8 mm (customer logo on request)
Wiring class
Class 5/6
Cable structure
2 x 35 mm² + 1 x 25 mm² + 2 × 4 mm² + (2 × 0.75 mm²) P + 10 x 0.75 mm²
Type of conductor
straight
External sheath, color
black
Locking detection
Maximum of 24 V / 14 mA via signal lines Lock Detection+ (WHOG) and Lock Detection- (WHBN)
Long-term stability (max. R0-Drift)
0.06 % (After 1000 hours at 130°C)
ECLASS 9.0
27144705