1073615 Phoenix Contact Electrical Wires & Cables

1073615 Product Details

• Application
  For charging electric vehicles (EV) with direct current (DC)
• Charging mode
  Mode 4
• Ambient temperature (operation)
  -30 °C ... 50 °C
• Number of power contacts
  3 (PE, DC+, DC-)
• Rated current for signal contacts
  20 A ((A+, A-))
• Resistor coding
  1000 Ω (between PE and CC1 / PE and CC2)
• Design line
  Standard
• Color handle area
  gray
• Label
  14.1 mm x 44.8 mm (customer logo on request)
• Flammability rating
  V0
• Cable structure
  3 x 16 mm² + 2 x 4 mm² + (2 × 0.75 mm²) P + 10 x 0.75 mm²
• Locking type
  Locking option for actuating lever with actuators integrated in the Vehicle Connector
• Locking detection
  Maximum of 24 V / 14 mA via signal lines Lock Detection+ (WHOG) and Lock Detection- (WHBN)
• Long-term stability (max. R0-Drift)
  0.06 % (After 1000 hours at 130°C)
• China RoHS
  Environmentally Friendly Use Period = 10;
• Affixed logo
  “PHOENIX CONTACT” logo
• Normative cable length restrictions
  NOTE: Cable management may be required.
• Width
  77 mm (Vehicle charging connector)
• Depth
  279.4 mm (Vehicle charging connector)
• Maximum charging power
  80 kW
Type of signal transmission
according to GB/T 27930-2015
Withdrawal force
< 100 N
Actuating element color
black
Housing material
Plastic
Material protective cap
Plastic
External cable diameter
27 mm ±0.4 mm
External sheath, color
black
Locking current
2 A
Tolerance at the sensor with the recommended measured current
±1K
ECLASS 11.0
27144705
Design
Generation 2
Conductor length
5.5 m
Degree of protection
IP55 (plugged in; when plugged in and ready to operate, the degree of protection is only ensued if both plug-in components are original products from Phoenix Contact or suitable standard-compliant products)
Rated current of power contacts
80 A
Note on the connection method
Crimp connection, cannot be disconnected
Temperature monitoring
2x Pt 1000
Housing color
black
Actuating lever material
Metal
Material mating face
Plastic
Type of conductor
straight
Outer sheath, material
TPU
Current supply duration
50 ms ... 100 ms (NOTE: Continuous current supply > 100 ms damages the locking actuator)
Shutdown temperature
90 °C equivalent to a Pt 1000 value of 1346.5 Ω
ETIM 6.0
EC002897
Height
137.8 mm (Vehicle charging connector)
Ambient temperature (storage/transport)
-40 °C ... 80 °C
Number of signal contacts
6 (S+, S-, A+, A-, CC1, CC2)
Rated voltage for signal contacts
30 V
Insertion/withdrawal cycles
> 10000
Color protective cap
black
Customer variations
On request
Wiring standards/regulations
GB/T 33594-2017
Wiring class
Class 5/6
Minimum bending radius
135 mm (5 x diameter)
Type of sensor
Pt 1000
Temperature coefficient (TCR)
3850 ppm/K
ECLASS 10.0.1
27144705
ETIM 7.0
EC002897
Type
DC charging cable
Standards/regulations
DIN EN 60751
Charging standard
GB/T
Stripping length
150 mm ±20 mm
Max. altitude
5000 m (above sea level)
Rated voltage for power contacts
1000 V DC
Insertion force
< 100 N
Mating face color
black
Material handle area
Soft plastic
Material surface of contacts
Ag
Wiring certifications
CQC1105-2015
Cable resistance
≤ 0.00121 Ω/m (based on a power core, at an ambient temperature of 20°C)
Recommended measured current
1 mA (1 V at 0°C)
Temperature range
-50 °C ... 130 °C
ECLASS 9.0
27144705

Product condition