1073603 Phoenix Contact Electrical Wires & Cables

1073603 Product Details

• Type
  DC charging cable
• Height
  137.8 mm (Vehicle charging connector)
• Width
  77 mm (Vehicle charging connector)
• Max. altitude
  5000 m (above sea level)
• Number of signal contacts
  6 (S+, S-, A+, A-, CC1, CC2)
• Rated voltage for signal contacts
  30 V
• Housing color
  black
• Housing material
  Plastic
• Flammability rating
  V0
• Affixed logo
  “PHOENIX CONTACT” logo
• Normative cable length restrictions
  NOTE: Cable management may be required.
• Ambient temperature (operation)
  -30 °C ... 50 °C
• Rated current of power contacts
  250 A
• Type of signal transmission
  according to GB/T 27930-2015
• Temperature monitoring
  2x Pt 1000
• Insertion/withdrawal cycles
  > 10000
• Color handle area
  gray
• Color protective cap
  black
• Material surface of contacts
  Ag
• Wiring class
  Class 5/6
External sheath, color
black
Locking type
Locking option for actuating lever with actuators integrated in the Vehicle Connector
Recommended measured current
1 mA (1 V at 0°C)
Standards/regulations
DIN EN 60751
Depth
279.4 mm (Vehicle charging connector)
Stripping length
150 mm ±20 mm
Number of power contacts
3 (PE, DC+, DC-)
Note on the connection method
Crimp connection, cannot be disconnected
Withdrawal force
< 100 N
Label
14.1 mm x 44.8 mm (customer logo on request)
Actuating lever material
Metal
Material protective cap
Plastic
Type of conductor
straight
Locking detection
Maximum of 24 V / 14 mA via signal lines Lock Detection+ (WHOG) and Lock Detection- (WHBN)
Design
Generation 2
Charging mode
Mode 4
Ambient temperature (storage/transport)
-40 °C ... 80 °C
Maximum charging power
250 kW
Rated current for signal contacts
20 A ((A+, A-))
Resistor coding
1000 Ω (between PE and CC1 / PE and CC2)
Design line
Standard
Actuating element color
black
Material handle area
Soft plastic
Cable structure
2 x 70 mm² + 1 x 25 mm² + 2 × 4 mm² + (2 × 0.75 mm²) P + 10 x 0.75 mm²
Wiring certifications
CQC1105-2015
Minimum bending radius
174.5 mm (5 x diameter)
Temperature coefficient (TCR)
3850 ppm/K
Shutdown temperature
90 °C equivalent to a Pt 1000 value of 1346.5 Ω
ETIM 7.0
EC002897
Application
For charging electric vehicles (EV) with direct current (DC)
Charging standard
GB/T
Conductor length
7 m
Degree of protection
IP55 (plugged in; when plugged in and ready to operate, the degree of protection is only ensued if both plug-in components are original products from Phoenix Contact or suitable standard-compliant products)
Rated voltage for power contacts
1000 V DC
Insertion force
< 100 N
Mating face color
black
Customer variations
On request
Material mating face
Plastic
External cable diameter
34.9 mm ±0.4 mm
Outer sheath, material
TPU
Current supply duration
50 ms ... 100 ms (NOTE: Continuous current supply > 100 ms damages the locking actuator)
Type of sensor
Pt 1000
China RoHS
Environmentally Friendly Use Period = 10;
ECLASS 9.0
27144705
Wiring standards/regulations
GB/T 33594-2017
Cable resistance
≤ 0.000272 Ω/m (based on a power core, at an ambient temperature of 20°C)
Locking current
2 A
Tolerance at the sensor with the recommended measured current
±1K
Long-term stability (max. R0-Drift)
0.06 % (After 1000 hours at 130°C)
ECLASS 11.0
27144705
Temperature range
-50 °C ... 130 °C
ECLASS 10.0.1
27144705
ETIM 6.0
EC002897

Product condition