1073601 Phoenix Contact Electrical Wires & Cables

Product Details

• Type
  DC charging cable
• Charging mode
  Mode 4
• Stripping length
  150 mm ±20 mm
• Degree of protection
  IP55 (plugged in; when plugged in and ready to operate, the degree of protection is only ensued if both plug-in components are original products from Phoenix Contact or suitable standard-compliant products)
• Rated voltage for signal contacts
  30 V
• Withdrawal force
  < 100 N
• Actuating lever material
  Metal
• Material protective cap
  Plastic
• Flammability rating
  V0
• Application
  For charging electric vehicles (EV) with direct current (DC)
• Design
  Generation 2
• Normative cable length restrictions
  NOTE: Cable management may be required.
• Ambient temperature (storage/transport)
  -40 °C ... 80 °C
• Number of power contacts
  3 (PE, DC+, DC-)
• Rated voltage for power contacts
  1000 V DC
• Number of signal contacts
  6 (S+, S-, A+, A-, CC1, CC2)
• Resistor coding
  1000 Ω (between PE and CC1 / PE and CC2)
• Insertion/withdrawal cycles
  > 10000
• Mating face color
  black
• Actuating element color
  black
Material handle area
Soft plastic
Type of conductor
straight
Locking type
Locking option for actuating lever with actuators integrated in the Vehicle Connector
Tolerance at the sensor with the recommended measured current
±1K
Shutdown temperature
90 °C equivalent to a Pt 1000 value of 1346.5 Ω
ECLASS 9.0
27144705
Affixed logo
“PHOENIX CONTACT” logo
Height
137.8 mm (Vehicle charging connector)
Width
77 mm (Vehicle charging connector)
Maximum charging power
250 kW
Rated current for signal contacts
20 A ((A+, A-))
Temperature monitoring
2x Pt 1000
Housing color
black
Color protective cap
black
Housing material
Plastic
Material surface of contacts
Ag
Wiring class
Class 5/6
Outer sheath, material
TPU
Locking current
2 A
Current supply duration
50 ms ... 100 ms (NOTE: Continuous current supply > 100 ms damages the locking actuator)
Temperature coefficient (TCR)
3850 ppm/K
ETIM 6.0
EC002897
Charging standard
GB/T
Conductor length
8 m
Max. altitude
5000 m (above sea level)
Rated current of power contacts
250 A
Note on the connection method
Crimp connection, cannot be disconnected
Insertion force
< 100 N
Color handle area
gray
Label
14.1 mm x 44.8 mm (customer logo on request)
Material mating face
Plastic
Cable structure
2 x 70 mm² + 1 x 25 mm² + 2 × 4 mm² + (2 × 0.75 mm²) P + 10 x 0.75 mm²
External sheath, color
black
Locking detection
Maximum of 24 V / 14 mA via signal lines Lock Detection+ (WHOG) and Lock Detection- (WHBN)
Type of sensor
Pt 1000
Long-term stability (max. R0-Drift)
0.06 % (After 1000 hours at 130°C)
Standards/regulations
DIN EN 60751
Depth
279.4 mm (Vehicle charging connector)
Ambient temperature (operation)
-30 °C ... 50 °C
Type of signal transmission
according to GB/T 27930-2015
Design line
Standard
Customer variations
On request
Wiring standards/regulations
GB/T 33594-2017
External cable diameter
34.9 mm ±0.4 mm
Cable resistance
≤ 0.000272 Ω/m (based on a power core, at an ambient temperature of 20°C)
Recommended measured current
1 mA (1 V at 0°C)
Temperature range
-50 °C ... 130 °C
China RoHS
Environmentally Friendly Use Period = 10;
ETIM 7.0
EC002897
Wiring certifications
CQC1105-2015
Minimum bending radius
174.5 mm (5 x diameter)
ECLASS 10.0.1
27144705
ECLASS 11.0
27144705